lkml.org 
[lkml]   [2024]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH v3 10/17] x86/resctrl: Add data structures for ABMC assignment
From
Hi Babu,

On 5/7/2024 1:40 PM, Moger, Babu wrote:
> On 5/3/24 18:32, Reinette Chatre wrote:
>> On 3/28/2024 6:06 PM, Babu Moger wrote:
>>> ABMC (Bandwidth Monitoring Event Configuration) counters can be configured
>>> by writing to L3_QOS_ABMC_CFG MSR. When ABMC is enabled, the user can
>>> configure a counter by writing to L3_QOS_ABMC_CFG setting the CfgEn field
>>> while specifying the Bandwidth Source, Bandwidth Types, and Counter
>>> Identifier. Add the MSR definition and individual field definitions.
>>>
>>> MSR L3_QOS_ABMC_CFG (C000_03FDh) definitions.
>>>
>>> ==========================================================================
>>> Bits Mnemonic Description Access Type Reset Value
>>> ==========================================================================
>>> 63 CfgEn Configuration Enable R/W 0
>>>
>>> 62 CtrEn Counter Enable R/W 0
>>>
>>> 61:53 – Reserved MBZ 0
>>>
>>> 52:48 CtrID Counter Identifier R/W 0
>>>
>>> 47 IsCOS BwSrc field is a COS R/W 0
>>> (not an RMID)
>>>
>>> 46:44 – Reserved MBZ 0
>>>
>>> 43:32 BwSrc Bandwidth Source R/W 0
>>> (RMID or COS)
>>>
>>> 31:0 BwType Bandwidth types to R/W 0
>>> track for this counter
>>> ==========================================================================
>>>
>>> The feature details are documentd in the APM listed below [1].

documentd -> documented

>>> [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
>>> Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
>>> Monitoring (ABMC).
>>
>> This changelog is purely a summary of the hardware architecture. I have not come
>> across a clear explanation on how this architecture is intended to be supported
>> by resctrl. When would resctrl need/want to set particular fields? What is
>> the mapping to resctrl?
>
> Something like this in the changelog?
>
> ABMC feature provides an option to assign(or pin) an RMID to the
> hardware counter and monitor the bandwidth for a longer duration.

Regarding "a longer duration":
https://lore.kernel.org/lkml/b5e68d85-4bf2-4e55-a9c1-b39cb7d94db6@intel.com/

>
> Hardware counters can be configured by writing to L3_QOS_ABMC_CFG MSR.
> Configuration is done by setting the CfgEn field while specifying the
> Bandwidth Source(RMID or CLOS), Bandwidth Types, and Counter Identifier.
>
> Add the configuration register definition.

This still looks to me like a cryptic description of the hardware architecture.
Could you please spell out to me how the above answers each of my questions?

Reinette


\
 
 \ /
  Last update: 2024-05-27 18:20    [W:0.096 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site