lkml.org 
[lkml]   [2024]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [RFC PATCH v3 07/17] x86/resctrl: Add support to enable/disable ABMC feature
From
Hi Reinette,

On 5/3/24 18:30, Reinette Chatre wrote:
> Hi Babu,
>
> On 3/28/2024 6:06 PM, Babu Moger wrote:
>> Add the functionality to enable/disable ABMC feature.
>>
>> ABMC is enabled by setting enabled bit(0) in MSR L3_QOS_EXT_CFG. When the
>> state of ABMC is changed, it must be changed to the updated value on all
>> logical processors in the QOS Domain.
>
> This patch does much more than enable what is mentioned above. There is little
> information about what this patch aims to accomplish. Without this it makes
> review difficult.

Sure. Also I need to add details about why resctrl_arch_reset_rmid_all()
is required. Will do.

>
>>
>> The ABMC feature details are documented in APM listed below [1].
>> [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
>> Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
>> Monitoring (ABMC).
>>
>> Signed-off-by: Babu Moger <babu.moger@amd.com>
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
>> ---
>> v3: No changes.
>>
>> v2: Few text changes in commit message.
>> ---
>> arch/x86/include/asm/msr-index.h | 1 +
>> arch/x86/kernel/cpu/resctrl/internal.h | 12 ++++
>> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 76 +++++++++++++++++++++++++-
>> 3 files changed, 88 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
>> index 05956bd8bacf..f16ee50b1a23 100644
>> --- a/arch/x86/include/asm/msr-index.h
>> +++ b/arch/x86/include/asm/msr-index.h
>> @@ -1165,6 +1165,7 @@
>> #define MSR_IA32_MBA_BW_BASE 0xc0000200
>> #define MSR_IA32_SMBA_BW_BASE 0xc0000280
>> #define MSR_IA32_EVT_CFG_BASE 0xc0000400
>> +#define MSR_IA32_L3_QOS_EXT_CFG 0xc00003ff
>>
>> /* MSR_IA32_VMX_MISC bits */
>> #define MSR_IA32_VMX_MISC_INTEL_PT (1ULL << 14)
>> diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
>> index 722388621403..8238ee437369 100644
>> --- a/arch/x86/kernel/cpu/resctrl/internal.h
>> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
>> @@ -96,6 +96,9 @@ cpumask_any_housekeeping(const struct cpumask *mask, int exclude_cpu)
>> return cpu;
>> }
>>
>> +/* ABMC ENABLE */
>
> Can this comment be made more useful?

How about?
/* Setting bit 0 in L3_QOS_EXT_CFG enables ABMC features */

Or I can remove it totally.

>
>> +#define ABMC_ENABLE BIT(0)
>> +
>> struct rdt_fs_context {
>> struct kernfs_fs_context kfc;
>> bool enable_cdpl2;
>> @@ -433,6 +436,7 @@ struct rdt_parse_data {
>> * @mbm_cfg_mask: Bandwidth sources that can be tracked when Bandwidth
>> * Monitoring Event Configuration (BMEC) is supported.
>> * @cdp_enabled: CDP state of this resource
>> + * @abmc_enabled: ABMC feature is enabled
>> *
>> * Members of this structure are either private to the architecture
>> * e.g. mbm_width, or accessed via helpers that provide abstraction. e.g.
>> @@ -448,6 +452,7 @@ struct rdt_hw_resource {
>> unsigned int mbm_width;
>> unsigned int mbm_cfg_mask;
>> bool cdp_enabled;
>> + bool abmc_enabled;
>> };
>>
>> static inline struct rdt_hw_resource *resctrl_to_arch_res(struct rdt_resource *r)
>> @@ -491,6 +496,13 @@ static inline bool resctrl_arch_get_cdp_enabled(enum resctrl_res_level l)
>>
>> int resctrl_arch_set_cdp_enabled(enum resctrl_res_level l, bool enable);
>>
>> +static inline bool resctrl_arch_get_abmc_enabled(enum resctrl_res_level l)
>> +{
>> + return rdt_resources_all[l].abmc_enabled;
>> +}
>> +
>> +int resctrl_arch_set_abmc_enabled(enum resctrl_res_level l, bool enable);
>> +
>> /*
>> * To return the common struct rdt_resource, which is contained in struct
>> * rdt_hw_resource, walk the resctrl member of struct rdt_hw_resource.
>> diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> index 05f551bc316e..f49073c86884 100644
>> --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> @@ -850,9 +850,15 @@ static int rdtgroup_mbm_assign_show(struct kernfs_open_file *of,
>> struct seq_file *s, void *v)
>> {
>> struct rdt_resource *r = of->kn->parent->priv;
>> + struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
>>
>> - if (r->mbm_assign_capable)
>> + if (r->mbm_assign_capable && hw_res->abmc_enabled) {
>> + seq_puts(s, "[abmc]\n");
>> + seq_puts(s, "legacy_mbm\n");
>> + } else if (r->mbm_assign_capable) {
>> seq_puts(s, "abmc\n");
>> + seq_puts(s, "[legacy_mbm]\n");
>> + }
>>
>> return 0;
>> }
>> @@ -2433,6 +2439,74 @@ int resctrl_arch_set_cdp_enabled(enum resctrl_res_level l, bool enable)
>> return 0;
>> }
>>
>> +static void resctrl_abmc_msrwrite(void *arg)
>> +{
>> + bool *enable = arg;
>> + u64 msrval;
>> +
>> + rdmsrl(MSR_IA32_L3_QOS_EXT_CFG, msrval);
>> +
>> + if (*enable)
>> + msrval |= ABMC_ENABLE;
>> + else
>> + msrval &= ~ABMC_ENABLE;
>> +
>> + wrmsrl(MSR_IA32_L3_QOS_EXT_CFG, msrval);
>> +}
>> +
>> +static int resctrl_abmc_setup(enum resctrl_res_level l, bool enable)
>> +{
>> + struct rdt_resource *r = &rdt_resources_all[l].r_resctrl;
>> + struct rdt_domain *d;
>> +
>> + /* Update QOS_CFG MSR on all the CPUs in cpu_mask */
>
> "all the CPUs in cpu_mask" -> "all the CPUs associated with the resource"?

Sure.

>
>> + list_for_each_entry(d, &r->domains, list) {
>> + on_each_cpu_mask(&d->cpu_mask, resctrl_abmc_msrwrite, &enable, 1);
>> + resctrl_arch_reset_rmid_all(r, d);
>
> Could the changelog please explain why this is needed and what the impact of
> this is?

Sure.

>
>> + }
>> +
>> + return 0;
>> +}
>
> I think the naming can be changed to make these easier to understand. For example,
> resctrl_abmc_msrwrite() -> resctrl_abmc_set_one()
> resctrl_abmc_setup() -> resctrl_abmc_set_all()

Sure.

>> +
>> +static int resctrl_abmc_enable(enum resctrl_res_level l)
>> +{
>> + struct rdt_hw_resource *hw_res = &rdt_resources_all[l];
>> + int ret = 0;
>> +
>> + if (!hw_res->abmc_enabled) {
>> + ret = resctrl_abmc_setup(l, true);
>> + if (!ret)
>> + hw_res->abmc_enabled = true;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void resctrl_abmc_disable(enum resctrl_res_level l)
>> +{
>> + struct rdt_hw_resource *hw_res = &rdt_resources_all[l];
>> +
>> + if (hw_res->abmc_enabled) {
>> + resctrl_abmc_setup(l, false);
>> + hw_res->abmc_enabled = false;
>> + }
>> +}
>> +
>> +int resctrl_arch_set_abmc_enabled(enum resctrl_res_level l, bool enable)
>> +{
>> + struct rdt_hw_resource *hw_res = &rdt_resources_all[l];
>> +
>> + if (!hw_res->r_resctrl.mbm_assign_capable)
>> + return -EINVAL;
>> +
>> + if (enable)
>> + return resctrl_abmc_enable(l);
>> +
>> + resctrl_abmc_disable(l);
>> +
>> + return 0;
>> +}
>
> Why is resctrl_arch_set_abmc_enabled() necessary? It seem to add an unnecessary
> layer of abstraction.
>

I feel it is better to keep it that way. It is consistent with definition
of resctrl_arch_set_cdp_enabled. It handles both enable and disable.
Otherwise we have add those checks from the caller.

--
Thanks
Babu Moger

\
 
 \ /
  Last update: 2024-05-27 18:19    [W:0.120 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site