lkml.org 
[lkml]   [2024]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH v1 0/2] Avoid rcu_core() if CPU just left guest vcpu
Date
On Fri, May 03, 2024 at 03:42:38PM -0300, Leonardo Bras wrote:
> Hello Sean, Marcelo and Paul,
>
> Thank you for your comments on this thread!
> I will try to reply some of the questions below:
>
> (Sorry for the delay, I was OOO for a while.)
>
>
> On Mon, Apr 01, 2024 at 01:21:25PM -0700, Sean Christopherson wrote:
> > On Thu, Mar 28, 2024, Leonardo Bras wrote:
> > > I am dealing with a latency issue inside a KVM guest, which is caused by
> > > a sched_switch to rcuc[1].
> > >
> > > During guest entry, kernel code will signal to RCU that current CPU was on
> > > a quiescent state, making sure no other CPU is waiting for this one.
> > >
> > > If a vcpu just stopped running (guest_exit), and a syncronize_rcu() was
> > > issued somewhere since guest entry, there is a chance a timer interrupt
> > > will happen in that CPU, which will cause rcu_sched_clock_irq() to run.
> > >
> > > rcu_sched_clock_irq() will check rcu_pending() which will return true,
> > > and cause invoke_rcu_core() to be called, which will (in current config)
> > > cause rcuc/N to be scheduled into the current cpu.
> > >
> > > On rcu_pending(), I noticed we can avoid returning true (and thus invoking
> > > rcu_core()) if the current cpu is nohz_full, and the cpu came from either
> > > idle or userspace, since both are considered quiescent states.
> > >
> > > Since this is also true to guest context, my idea to solve this latency
> > > issue by avoiding rcu_core() invocation if it was running a guest vcpu.
> > >
> > > On the other hand, I could not find a way of reliably saying the current
> > > cpu was running a guest vcpu, so patch #1 implements a per-cpu variable
> > > for keeping the time (jiffies) of the last guest exit.
> > >
> > > In patch #2 I compare current time to that time, and if less than a second
> > > has past, we just skip rcu_core() invocation, since there is a high chance
> > > it will just go back to the guest in a moment.
> >
> > What's the downside if there's a false positive?
>
> False positive being guest_exit without going back in this CPU, right?
> If so in WSC, supposing no qs happens and there is a pending request, RCU
> will take a whole second to run again, possibly making other CPUs wait
> this long for a synchronize_rcu.

Just to make sure it's clear:
It will wait at most 1 second, if the grace period was requested just
before the last_guest_exit update. It will never make the grace period
be longer than the already defined 1 second.

That's because in the timer interrupt we have:

if (rcu_pending())
invoke_rcu_core();

and on rcu_pending():

if ((user || rcu_is_cpu_rrupt_from_idle() || rcu_recent_guest_exit()) &&
rcu_nohz_full_cpu())
return 0;

Meaning that even if we allow 5 seconds after recent_guest_exit, it will
only make rcu_nohz_full_cpu() run, and it will check if the grace period is
younger than 1 second before skipping the rcu_core() invocation.



>
> This value (1 second) could defined in .config or as a parameter if needed,
> but does not seem a big deal,
>
> >
> > > What I know it's weird with this patch:
> > > 1 - Not sure if this is the best way of finding out if the cpu was
> > > running a guest recently.
> > >
> > > 2 - This per-cpu variable needs to get set at each guest_exit(), so it's
> > > overhead, even though it's supposed to be in local cache. If that's
> > > an issue, I would suggest having this part compiled out on
> > > !CONFIG_NO_HZ_FULL, but further checking each cpu for being nohz_full
> > > enabled seems more expensive than just setting this out.
> >
> > A per-CPU write isn't problematic, but I suspect reading jiffies will be quite
> > imprecise, e.g. it'll be a full tick "behind" on many exits.
>
> That would not be a problem, as it would mean 1 tick less waiting in the
> false positive WSC, and the 1s amount is plenty.

s/less/more/

>
> >
> > > 3 - It checks if the guest exit happened over than 1 second ago. This 1
> > > second value was copied from rcu_nohz_full_cpu() which checks if the
> > > grace period started over than a second ago. If this value is bad,
> > > I have no issue changing it.
> >
> > IMO, checking if a CPU "recently" ran a KVM vCPU is a suboptimal heuristic regardless
> > of what magic time threshold is used. IIUC, what you want is a way to detect if
> > a CPU is likely to _run_ a KVM vCPU in the near future.
>
> That's correct!
>
> > KVM can provide that
> > information with much better precision, e.g. KVM knows when when it's in the core
> > vCPU run loop.
>
> That would not be enough.
> I need to present the application/problem to make a point:
>
> - There is multiple isolated physical CPU (nohz_full) on which we want to
> run KVM_RT vcpus, which will be running a real-time (low latency) task.
> - This task should not miss deadlines (RT), so we test the VM to make sure
> the maximum latency on a long run does not exceed the latency requirement
> - This vcpu will run on SCHED_FIFO, but has to run on lower priority than
> rcuc, so we can avoid stalling other cpus.
> - There may be some scenarios where the vcpu will go back to userspace
> (from KVM_RUN ioctl), and that does not mean it's good to interrupt the
> this to run other stuff (like rcuc).
>
> Now, I understand it will cover most of our issues if we have a context
> tracking around the vcpu_run loop, since we can use that to decide not to
> run rcuc on the cpu if the interruption hapenned inside the loop.
>
> But IIUC we can have a thread that "just got out of the loop" getting
> interrupted by the timer, and asked to run rcu_core which will be bad for
> latency.
>
> I understand that the chance may be statistically low, but happening once
> may be enough to crush the latency numbers.
>
> Now, I can't think on a place to put this context trackers in kvm code that
> would avoid the chance of rcuc running improperly, that's why the suggested
> timeout, even though its ugly.
>
> About the false-positive, IIUC we could reduce it if we reset the per-cpu
> last_guest_exit on kvm_put.
>
> >
> > > 4 - Even though I could detect no issue, I included linux/kvm_host.h into
> > > rcu/tree_plugin.h, which is the first time it's getting included
> > > outside of kvm or arch code, and can be weird.
> >
> > Heh, kvm_host.h isn't included outside of KVM because several architectures can
> > build KVM as a module, which means referencing global KVM varibles from the kernel
> > proper won't work.
> >
> > > An alternative would be to create a new header for providing data for
> > > non-kvm code.
> >
> > I doubt a new .h or .c file is needed just for this, there's gotta be a decent
> > landing spot for a one-off variable.
>
> You are probably right
>
> > E.g. I wouldn't be at all surprised if there
> > is additional usefulness in knowing if a CPU is in KVM's core run loop and thus
> > likely to do a VM-Enter in the near future, at which point you could probably make
> > a good argument for adding a flag in "struct context_tracking". Even without a
> > separate use case, there's a good argument for adding that info to context_tracking.
>
> For the tracking solution, makes sense :)
> Not sure if the 'timeout' alternative will be that useful outside rcu.
>
> Thanks!
> Leo


\
 
 \ /
  Last update: 2024-05-27 18:15    [W:0.171 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site