lkml.org 
[lkml]   [2024]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v15 00/16] Add audio support in v4l2 framework
    Em Thu, 2 May 2024 09:59:56 +0100
    Mauro Carvalho Chehab <mchehab@kernel.org> escreveu:

    > Em Thu, 02 May 2024 09:46:14 +0200
    > Takashi Iwai <tiwai@suse.de> escreveu:
    >
    > > On Wed, 01 May 2024 03:56:15 +0200,
    > > Mark Brown wrote:
    > > >
    > > > On Tue, Apr 30, 2024 at 05:27:52PM +0100, Mauro Carvalho Chehab wrote:
    > > > > Mark Brown <broonie@kernel.org> escreveu:
    > > > > > On Tue, Apr 30, 2024 at 10:21:12AM +0200, Sebastian Fricke wrote:
    > > >
    > > > > > The discussion around this originally was that all the audio APIs are
    > > > > > very much centered around real time operations rather than completely
    > > >
    > > > > The media subsystem is also centered around real time. Without real
    > > > > time, you can't have a decent video conference system. Having
    > > > > mem2mem transfers actually help reducing real time delays, as it
    > > > > avoids extra latency due to CPU congestion and/or data transfers
    > > > > from/to userspace.
    > > >
    > > > Real time means strongly tied to wall clock times rather than fast - the
    > > > issue was that all the ALSA APIs are based around pushing data through
    > > > the system based on a clock.
    > > >
    > > > > > That doesn't sound like an immediate solution to maintainer overload
    > > > > > issues... if something like this is going to happen the DRM solution
    > > > > > does seem more general but I'm not sure the amount of stop energy is
    > > > > > proportionate.
    > > >
    > > > > I don't think maintainer overload is the issue here. The main
    > > > > point is to avoid a fork at the audio uAPI, plus the burden
    > > > > of re-inventing the wheel with new codes for audio formats,
    > > > > new documentation for them, etc.
    > > >
    > > > I thought that discussion had been had already at one of the earlier
    > > > versions? TBH I've not really been paying attention to this since the
    > > > very early versions where I raised some similar "why is this in media"
    > > > points and I thought everyone had decided that this did actually make
    > > > sense.
    > >
    > > Yeah, it was discussed in v1 and v2 threads, e.g.
    > > https://patchwork.kernel.org/project/linux-media/cover/1690265540-25999-1-git-send-email-shengjiu.wang@nxp.com/#25485573
    > >
    > > My argument at that time was how the operation would be, and the point
    > > was that it'd be a "batch-like" operation via M2M without any timing
    > > control. It'd be a very special usage for for ALSA, and if any, it'd
    > > be hwdep -- that is a very hardware-specific API implementation -- or
    > > try compress-offload API, which looks dubious.
    > >
    > > OTOH, the argument was that there is already a framework for M2M in
    > > media API and that also fits for the batch-like operation, too. So
    > > was the thread evolved until now.
    >
    > M2M transfers are not a hardware-specific API, and such kind of
    > transfers is not new either. Old media devices like bttv have
    > internally a way to do PCI2PCI transfers, allowing media streams
    > to be transferred directly without utilizing CPU. The media driver
    > supports it for video, as this made a huge difference of performance
    > back then.
    >
    > On embedded world, this is a pretty common scenario: different media
    > IP blocks can communicate with each other directly via memory. This
    > can happen for video capture, video display and audio.
    >
    > With M2M, most of the control is offloaded to the hardware.
    >
    > There are still time control associated with it, as audio and video
    > needs to be in sync. This is done by controlling the buffers size
    > and could be fine-tuned by checking when the buffer transfer is done.
    >
    > On media, M2M buffer transfers are started via VIDIOC_QBUF,
    > which is a request to do a frame transfer. A similar ioctl
    > (VIDIOC_DQBUF) is used to monitor when the hardware finishes
    > transfering the buffer. On other words, the CPU is responsible
    > for time control.

    Just complementing: on media, we do this per video buffer (or
    per half video buffer). A typical use case on cameras is to have
    buffers transferred 30 times per second, if the video was streamed
    at 30 frames per second.

    I would assume that, on an audio/video stream, the audio data
    transfer will be programmed to also happen on a regular interval.

    So, if the video stream is programmed to a 30 frames per second
    rate, I would assume that the associated audio stream will also be
    programmed to be grouped into 30 data transfers per second. On such
    scenario, if the audio is sampled at 48 kHZ, it means that:

    1) each M2M transfer commanded by CPU will copy 1600 samples;
    2) the time between each sample will remain 1/48000;
    3) a notification event telling that 1600 samples were transferred
    will be generated when the last sample happens;
    4) CPU will do time control by looking at the notification events.

    > On other words, this is still real time. The main difference
    > from a "sync" transfer is that the CPU doesn't need to copy data
    > from/to different devices, as such operation is offloaded to the
    > hardware.
    >
    > Regards,
    > Mauro

    \
     
     \ /
      Last update: 2024-05-27 18:12    [W:5.540 / U:0.672 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site