lkml.org 
[lkml]   [2024]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT PATCH v2 10/10] arm64: dts: microchip: sparx5_pcb135: drop duplicated NOR flash
From
Date
Hi Krzysztof,

On Fri, 2024-04-05 at 21:04 +0200, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> Since beginning the DTS extended the SPI0 in two places adding two
> SPI
> muxes, each with same SPI NOR flash.  Both used exactly the same
> chip-selects, so this was clearly buggy code.  Then in commit
> d0f482bb06f9 ("arm64: dts: sparx5: Add the Sparx5 switch node") one
> SPI
> mux was removed, while keeping the SPI NOR flash node.
>
> This still leaves duplicated SPI nodes under same chip select 0,
> reported by dtc W=1 warnings:
>
>   sparx5_pcb135_board.dtsi:92.10-96.4: Warning
> (unique_unit_address_if_enabled):
> /axi@600000000/spi@600104000/flash@0: duplicate unit-address (also
> used in node /axi@600000000/spi@600104000/spi@0)
>
> Steen Hegelund confirmed that in fact there is a SPI mux, thus remove
> the duplicated node without the mux.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Not tested on hardware
>
> Changes in v2:
> 1. Remove SPI node without mux.
> ---
>  arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi | 9 ---------
>  1 file changed, 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
> b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
> index 20016efb3656..af2f1831f07f 100644
> --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
> +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
> @@ -87,15 +87,6 @@ i2cmux_s32: i2cmux-3-pins {
>         };
>  };
>
> -&spi0 {
> -       status = "okay";
> -       flash@0 {
> -               compatible = "jedec,spi-nor";
> -               spi-max-frequency = <8000000>;
> -               reg = <0>;
> -       };
> -};
> -
>  &spi0 {
>         status = "okay";
>         spi@0 {
> --
> 2.34.1
>

This also works fine on my setup now.
Thanks for the patch series.

For this patch:
Tested-by: Steen Hegelund <Steen.Hegelund@microchip.com>


BR
Steen


\
 
 \ /
  Last update: 2024-05-27 16:28    [W:0.109 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site