lkml.org 
[lkml]   [2024]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject回复: [PATCH v10 2/3] clocksource: Add JH7110 timer driver
Date


> -----邮件原件-----
> 发件人: Ziv Xu
> 发送时间: 2024年4月12日 16:46
> 收件人: Daniel Lezcano <daniel.lezcano@linaro.org>; Thomas Gleixner
> <tglx@linutronix.de>; Emil Renner Berthing
> <emil.renner.berthing@canonical.com>; Christophe JAILLET
> <christophe.jaillet@wanadoo.fr>
> 抄送: linux-riscv@lists.infradead.org; devicetree@vger.kernel.org; Rob Herring
> <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Paul Walmsley
> <paul.walmsley@sifive.com>; Palmer Dabbelt <palmer@dabbelt.com>; Albert
> Ou <aou@eecs.berkeley.edu>; Philipp Zabel <p.zabel@pengutronix.de>; Walker
> Chen <walker.chen@starfivetech.com>; Xingyu Wu
> <xingyu.wu@starfivetech.com>; linux-kernel@vger.kernel.org; Conor Dooley
> <conor@kernel.org>
> 主题: [PATCH v10 2/3] clocksource: Add JH7110 timer driver
>
> From: Xingyu Wu <xingyu.wu@starfivetech.com>
>
> Add timer driver for the StarFive JH7110 SoC.
>
> This timer has four free-running and independent 32-bit counters.
> Each channel(counter) can trigger an interrupt when timeout even CPU is
> sleeping. So this timer is used as global timer and register clockevent for each
> CPU core after riscv-timer registration on the StarFive JH7110 SoC.
>
> Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/clocksource/Kconfig | 11 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-jh7110.c | 345 +++++++++++++++++++++++++++++
> include/linux/cpuhotplug.h | 1 +
> 5 files changed, 365 insertions(+)
> create mode 100644 drivers/clocksource/timer-jh7110.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7c121493f43d..ef9b5f5bad9e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21043,6 +21043,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
> F: sound/soc/starfive/jh7110_tdm.c
>
> +STARFIVE JH7110 TIMER DRIVER
> +M: Samin Guo <samin.guo@starfivetech.com>
> +M: Xingyu Wu <xingyu.wu@starfivetech.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> +F: drivers/clocksource/timer-jh7110.c
> +
> STARFIVE JH71X0 CLOCK DRIVERS
> M: Emil Renner Berthing <kernel@esmil.dk>
> M: Hal Feng <hal.feng@starfivetech.com>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index
> 34faa0320ece..2dc97201dee1 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -641,6 +641,17 @@ config RISCV_TIMER
> is accessed via both the SBI and the rdcycle instruction. This is
> required for all RISC-V systems.
>
> +config STARFIVE_JH7110_TIMER
> + bool "Timer for the STARFIVE JH7110 SoC"
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + select TIMER_OF
> + select CLKSRC_MMIO
> + default ARCH_STARFIVE
> + help
> + This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> + the system has started RISCV_TIMER, but you can also use this timer
> + which can provide four channels to do a lot more things on JH7110 SoC.
> +
> config CLINT_TIMER
> bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> depends on GENERIC_SCHED_CLOCK && RISCV diff --git
> a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index
> 4bb856e4df55..8dc2f0ea2d0f 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
> obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> +obj-$(CONFIG_STARFIVE_JH7110_TIMER) += timer-jh7110.o
> obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-jh7110.c
> b/drivers/clocksource/timer-jh7110.c
> new file mode 100644
> index 000000000000..dc770507f209
> --- /dev/null
> +++ b/drivers/clocksource/timer-jh7110.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive JH7110 Timer driver
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + *
> + * This timer has four free-running and independent 32-bit counters and
> +runs in 24MHz
> + * clock on the StarFive JH7110 SoC. Each channel(counter) can trigger
> +an interrupt
> + * when timeout even CPU is sleeping. They support one-shot mode and
> continuous-run mode.
> + *
> + * Each channel is used as a global timer that serves each cpu core:
> + * JH7110 Timer Channel 0 -- CPU 0
> + * JH7110 Timer Channel 1 -- CPU 1
> + * JH7110 Timer Channel 2 -- CPU 2
> + * JH7110 Timer Channel 3 -- CPU 3
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/cpu.h>
> +#include <linux/iopoll.h>
> +#include <linux/irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> +#define JH7110_TIMER_CH_LEN 0x40
> +#define JH7110_TIMER_CH_BASE(x) ((x) * JH7110_TIMER_CH_LEN)
> +#define JH7110_TIMER_CH_MAX 4
> +
> +#define JH7110_DELAY_US 0
> +#define JH7110_TIMEOUT_US 10000
> +#define JH7110_CLOCKEVENT_RATING 300
> +#define JH7110_TIMER_MAX_TICKS 0xffffffff
> +#define JH7110_TIMER_MIN_TICKS 0xf
> +
> +#define JH7110_TIMER_INT_STATUS 0x00 /* RO[0:4]: Interrupt Status
> for channel0~4 */
> +#define JH7110_TIMER_CTL 0x04 /* RW[0]: 0-continuous run, 1-single run
> */
> +#define JH7110_TIMER_LOAD 0x08 /* RW: load value to counter */
> +#define JH7110_TIMER_ENABLE 0x10 /* RW[0]: timer enable register */
> +#define JH7110_TIMER_RELOAD 0x14 /* RW: write 1 or 0 both reload
> counter */
> +#define JH7110_TIMER_VALUE 0x18 /* RO: timer value register */
> +#define JH7110_TIMER_INT_CLR 0x20 /* RW: timer interrupt clear
> register */
> +#define JH7110_TIMER_INT_MASK 0x24 /* RW[0]: timer interrupt
> mask register */
> +
> +#define JH7110_TIMER_INT_CLR_ENA BIT(0)
> +#define JH7110_TIMER_INT_CLR_AVA_MASK BIT(1)
> +
> +#define JH7110_PERCPU_GET_CLKEVT
> (&jh7110_timer_info.clkevt[smp_processor_id()])
> +
> +/**
> + * struct jh7110_clkevt - Description of each timer channel
> + * @clk: Clock of each timer channel
> + * @rst: Reset of each timer channel
> + * @base: Virtual address of each timer channel
> + * @irq: Interrupt number of each timer channel
> + * @timer_enabled: Enabled flag for each timer channel
> + * @name: Name of each timer channel
> + */
> +struct jh7110_clkevt {
> + struct clk *clk;
> + struct reset_control *rst;
> + void __iomem *base;
> + int irq;
> + bool timer_enabled;
> + char name[sizeof("jh7110-timer.chX")];
> +};
> +
> +struct jh7110_timer_priv {
> + struct clk *pclk;
> + struct reset_control *prst;
> + struct device *dev;
> + struct jh7110_clkevt clkevt[JH7110_TIMER_CH_MAX];
> +};
> +
> +static struct jh7110_timer_priv jh7110_timer_info;
> +
> +/* 0:continuous-run mode, 1:single-run mode */ enum jh7110_timer_mode {
> + JH7110_TIMER_MODE_CONTIN,
> + JH7110_TIMER_MODE_SINGLE,
> +};
> +
> +/* Interrupt Mask, 0:Unmask, 1:Mask */
> +enum jh7110_timer_int_mask {
> + JH7110_TIMER_INT_ENA,
> + JH7110_TIMER_INT_DIS,
> +};
> +
> +enum jh7110_timer_enable {
> + JH7110_TIMER_DIS,
> + JH7110_TIMER_ENA,
> +};
> +
> +/*
> + * BIT(0): Read value represent channel int status.
> + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> + */
> +static inline int jh7110_timer_int_clear(struct jh7110_clkevt *clkevt)
> +{
> + u32 value;
> + int ret;
> +
> + /* Waiting interrupt can be cleared */
> + ret = readl_poll_timeout_atomic(clkevt->base + JH7110_TIMER_INT_CLR,
> value,
> + !(value & JH7110_TIMER_INT_CLR_AVA_MASK),
> + JH7110_DELAY_US, JH7110_TIMEOUT_US);
> + if (!ret)
> + writel(JH7110_TIMER_INT_CLR_ENA, clkevt->base +
> +JH7110_TIMER_INT_CLR);
> +
> + return ret;
> +}
> +
> +static int jh7110_timer_start(struct jh7110_clkevt *clkevt) {
> + int ret;
> +
> + /* Disable and clear interrupt first */
> + writel(JH7110_TIMER_INT_DIS, clkevt->base +
> JH7110_TIMER_INT_MASK);
> + ret = jh7110_timer_int_clear(clkevt);
> +
> + writel(JH7110_TIMER_INT_ENA, clkevt->base +
> JH7110_TIMER_INT_MASK);
> + writel(JH7110_TIMER_ENA, clkevt->base + JH7110_TIMER_ENABLE);
> +
> + return ret;
> +}
> +
> +static int jh7110_timer_shutdown(struct clock_event_device *evt) {
> + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> +
> + writel(JH7110_TIMER_DIS, clkevt->base + JH7110_TIMER_ENABLE);
> + return jh7110_timer_int_clear(clkevt); }
> +
> +/* IRQ handler for the timer */
> +static irqreturn_t jh7110_timer_interrupt(int irq, void *data) {
> + struct clock_event_device *evt = (struct clock_event_device *)data;
> + struct jh7110_clkevt *clkevt = &jh7110_timer_info.clkevt[0];
> + u32 reg = readl(clkevt->base + JH7110_TIMER_INT_STATUS);
> + u8 cpu_id = smp_processor_id();
> +
> + /* Check interrupt status and channel(cpu) ID */
> + if (!(reg & BIT(cpu_id)))
> + return IRQ_NONE;
> +
> + clkevt = &jh7110_timer_info.clkevt[cpu_id];
> + writel(JH7110_TIMER_INT_CLR_ENA, (clkevt->base +
> +JH7110_TIMER_INT_CLR));
> +
> + if (evt->event_handler)
> + evt->event_handler(evt);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int jh7110_timer_set_periodic(struct clock_event_device *evt) {
> + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> +
> + writel(JH7110_TIMER_MODE_CONTIN, clkevt->base +
> JH7110_TIMER_CTL);
> + return 0;
> +}
> +
> +static int jh7110_timer_set_oneshot(struct clock_event_device *evt) {
> + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> +
> + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base +
> JH7110_TIMER_CTL);
> + return 0;
> +}
> +
> +static int jh7110_timer_set_next_event(unsigned long next,
> + struct clock_event_device *evt) {
> + struct jh7110_clkevt *clkevt = JH7110_PERCPU_GET_CLKEVT;
> +
> + writel(JH7110_TIMER_MODE_SINGLE, clkevt->base +
> JH7110_TIMER_CTL);
> + writel(next, clkevt->base + JH7110_TIMER_LOAD);
> +
> + return jh7110_timer_start(clkevt);
> +}
> +
> +static DEFINE_PER_CPU(struct clock_event_device, jh7110_clock_event) = {
> + .features = CLOCK_EVT_FEAT_PERIODIC |
> + CLOCK_EVT_FEAT_ONESHOT,
> + .rating = JH7110_CLOCKEVENT_RATING,
> + .set_state_shutdown = jh7110_timer_shutdown,
> + .set_state_periodic = jh7110_timer_set_periodic,
> + .set_state_oneshot = jh7110_timer_set_oneshot,
> + .set_state_oneshot_stopped = jh7110_timer_shutdown,
> + .set_next_event = jh7110_timer_set_next_event,
> +};
> +
> +static int jh7110_timer_dying_cpu(unsigned int cpu) {
> + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> +
> + if (!priv->clkevt[cpu].timer_enabled)
> + return 0;
> +
> + writel(JH7110_TIMER_DIS, priv->clkevt[cpu].base +
> JH7110_TIMER_ENABLE);
> + jh7110_timer_int_clear(&priv->clkevt[cpu]);
> + reset_control_assert(priv->clkevt[cpu].rst);
> + clk_disable_unprepare(priv->clkevt[cpu].clk);
> +
> + return 0;
> +}
> +
> +static int jh7110_timer_starting_cpu(unsigned int cpu) {
> + struct clock_event_device *evt = per_cpu_ptr(&jh7110_clock_event, cpu);
> + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> + int err;
> + u32 rate;
> +
> + if (cpu >= JH7110_TIMER_CH_MAX)
> + return -ENOMEM;
> +
> + err = clk_prepare_enable(priv->clkevt[cpu].clk);
> + if (err)
> + goto err_starting_cpu;
> +
> + err = reset_control_deassert(priv->clkevt[cpu].rst);
> + if (err)
> + goto err_soft_reset;
> +
> + rate = clk_get_rate(priv->clkevt[cpu].clk);
> + evt->cpumask = cpumask_of(cpu);
> + evt->irq = priv->clkevt[cpu].irq;
> +
> + err = irq_force_affinity(evt->irq, cpumask_of(cpu));
> + if (err)
> + goto err_affinity;
> +
> + clockevents_config_and_register(evt, rate, JH7110_TIMER_MIN_TICKS,
> + JH7110_TIMER_MAX_TICKS);
> +
> + /* Use one-shot mode */
> + writel(JH7110_TIMER_MODE_SINGLE, (priv->clkevt[cpu].base +
> +JH7110_TIMER_CTL));
> +
> + priv->clkevt[cpu].timer_enabled = true;
> +
> + err = jh7110_timer_start(&priv->clkevt[cpu]);
> + if (err)
> + goto err_affinity;
> + return 0;
> +
> +err_affinity:
> + reset_control_assert(priv->clkevt[cpu].rst);
> +err_soft_reset:
> + clk_disable_unprepare(priv->clkevt[cpu].clk);
> +err_starting_cpu:
> + free_irq(evt->irq, evt);
> + return err;
> +}
> +
> +static int jh7110_timer_probe(struct platform_device *pdev) {
> + struct jh7110_timer_priv *priv = &jh7110_timer_info;
> + struct clock_event_device *evt;
> + struct jh7110_clkevt *clkevt;
> + char name[sizeof("chX")];
> + int ch;
> + int ret;
> + void __iomem *base;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return dev_err_probe(&pdev->dev, PTR_ERR(base),
> + "failed to map registers\n");
> +
> + priv->prst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> + if (IS_ERR(priv->prst))
> + return dev_err_probe(&pdev->dev, PTR_ERR(priv->prst),
> + "failed to get apb reset\n");
> +
> + priv->pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> + if (IS_ERR(priv->pclk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk),
> + "failed to get & enable apb clock\n");
> +
> + ret = reset_control_deassert(priv->prst);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "failed to deassert apb
> +reset\n");
> +
> + for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
> + evt = per_cpu_ptr(&jh7110_clock_event, ch);
> + clkevt = &priv->clkevt[ch];
> + snprintf(name, sizeof(name), "ch%d", ch);
> +
> + clkevt->base = base + JH7110_TIMER_CH_BASE(ch);
> + /* Ensure timer is disabled */
> + writel(JH7110_TIMER_DIS, clkevt->base + JH7110_TIMER_ENABLE);
> + ret = jh7110_timer_int_clear(clkevt);
> + if (ret)
> + return ret;
> +
> + clkevt->rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> + if (IS_ERR(clkevt->rst))
> + return PTR_ERR(clkevt->rst);
> +
> + clkevt->clk = devm_clk_get(&pdev->dev, name);
> + if (IS_ERR(clkevt->clk))
> + return PTR_ERR(clkevt->clk);
> +
> + clkevt->irq = platform_get_irq(pdev, ch);
> + if (clkevt->irq < 0)
> + return clkevt->irq;
> +
> + snprintf(clkevt->name, sizeof(clkevt->name), "jh7110-timer.ch%d",
> ch);
> + ret = devm_request_irq(&pdev->dev, clkevt->irq,
> jh7110_timer_interrupt,
> + IRQF_TIMER | IRQF_IRQPOLL,
> + clkevt->name, evt);
> +
> + if (ret)
> + return ret;
> +
> + clkevt->timer_enabled = false;
> + }
> +
> + return cpuhp_setup_state(CPUHP_AP_JH7110_TIMER_STARTING,
> + "clockevents/jh7110/timer:starting",
> + jh7110_timer_starting_cpu, jh7110_timer_dying_cpu); }
> +
> +static const struct of_device_id jh7110_timer_match[] = {
> + { .compatible = "starfive,jh7110-timer", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
> +
> +static struct platform_driver jh7110_timer_driver = {
> + .probe = jh7110_timer_probe,
> + .driver = {
> + .name = "jh7110-timer",
> + .of_match_table = jh7110_timer_match,
> + },
> +};
> +module_platform_driver(jh7110_timer_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index
> 35e78ddb2b37..4a8b487c327e 100644
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -175,6 +175,7 @@ enum cpuhp_state {
> CPUHP_AP_CSKY_TIMER_STARTING,
> CPUHP_AP_TI_GP_TIMER_STARTING,
> CPUHP_AP_HYPERV_TIMER_STARTING,
> + CPUHP_AP_JH7110_TIMER_STARTING,
> /* Must be the last timer callback */
> CPUHP_AP_DUMMY_TIMER_STARTING,
> CPUHP_AP_ARM_XEN_STARTING,
> --
> 2.17.1

Hi Daniel / Thomas

I have submitted new version of patch for jh7110 timer driver. Could you please help to review and give your comments?
Thanks a lot!

Best regards,
Ziv.Xu
\
 
 \ /
  Last update: 2024-04-30 08:36    [W:0.193 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site