Messages in this thread | | | Date | Tue, 30 Apr 2024 10:34:00 +0530 | Subject | Re: [PATCH v3] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances | From | Beleswar Prasad Padhi <> |
| |
Hi Bhavya,
On 15/04/24 13:52, Bhavya Kapoor wrote: > On 12/04/24 16:50, Beleswar Padhi wrote: >> CAN instance 0 in the mcu domain is brought on the J721E-SK board >> through header J1. Thus, add its respective transceiver 1 dt node to add >> support for this CAN instance. >> >> CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK >> board through headers J5, J6 and J2 respectively. Thus, add their >> respective transceivers 2, 3 and 4 dt nodes to add support for these CAN >> instances. >> >> Signed-off-by: Beleswar Padhi <b-padhi@ti.com> > Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com> >> --- >> Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3 >> >> v3: Changelog: >> 1) Updated board name in capital letters in commit message description >> 2) Updated test logs to include communication between all applicable CAN >> instances >> >> Link to v2: >> https://lore.kernel.org/linux-arm-kernel/20240325103405.182692-1-b-padhi@ti.com/ >> >> v2: Changelog: >> 1) Re-ordered status = "okay" property to the end of all applicable dt >> nodes following kernel documentation >> >> Link to v1: >> https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@ti.com/ >> >> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++ >> 1 file changed, 116 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts >> index 0c4575ad8d7c..7170f0220afd 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts >> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts >> @@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 { >> <3300000 0x1>; >> }; >> >> + transceiver1: can-phy0 { > Hi Beleswar, all looks good to me just one little suggestion to keep > > transceiver and can-phy number as same for better understanding > > and to avoid some bit of confusion later. > > Eg.) transceiver<x>: can-phy<x> Thanks for the review. I will send PATCH v4 with these changes shortly. > >> + compatible = "ti,tcan1042"; >> + #phy-cells = <0>; >> + max-bitrate = <5000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; >> + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + transceiver2: can-phy1 { >> + compatible = "ti,tcan1042"; >> + #phy-cells = <0>; >> + max-bitrate = <5000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan0_gpio_pins_default>; >> + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + transceiver3: can-phy2 { >> + compatible = "ti,tcan1042"; >> + #phy-cells = <0>; >> + max-bitrate = <5000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan5_gpio_pins_default>; >> + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + transceiver4: can-phy3 { >> + compatible = "ti,tcan1042"; >> + #phy-cells = <0>; >> + max-bitrate = <5000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan9_gpio_pins_default>; >> + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; >> + }; >> + >> dp_pwr_3v3: fixedregulator-dp-prw { >> compatible = "regulator-fixed"; >> regulator-name = "dp-pwr"; >> @@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ >> >; >> }; >> >> + main_mcan0_pins_default: main-mcan0-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ >> + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ >> + >; >> + }; >> + >> + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ >> + >; >> + }; >> + >> + main_mcan5_pins_default: main-mcan5-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ >> + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ >> + >; >> + }; >> + >> + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ >> + >; >> + }; >> + >> + main_mcan9_pins_default: main-mcan9-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ >> + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ >> + >; >> + }; >> + >> + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ >> + >; >> + }; >> + >> dp0_pins_default: dp0-default-pins { >> pinctrl-single,pins = < >> J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ >> @@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >> >; >> }; >> >> + mcu_mcan0_pins_default: mcu-mcan0-default-pins { >> + pinctrl-single,pins = < >> + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ >> + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ >> + >; >> + }; >> + >> + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { >> + pinctrl-single,pins = < >> + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ >> + >; >> + }; >> + >> /* Reset for M.2 M Key slot on PCIe1 */ >> mkey_reset_pins_default: mkey-reset-pns-default-pins { >> pinctrl-single,pins = < >> @@ -1108,6 +1196,34 @@ &pcie1_rc { >> num-lanes = <2>; >> }; >> >> +&mcu_mcan0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&mcu_mcan0_pins_default>; >> + phys = <&transceiver1>; >> + status = "okay"; >> +}; >> + >> +&main_mcan0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan0_pins_default>; >> + phys = <&transceiver2>; >> + status = "okay"; >> +}; >> + >> +&main_mcan5 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan5_pins_default>; >> + phys = <&transceiver3>; >> + status = "okay"; >> +}; >> + >> +&main_mcan9 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_mcan9_pins_default>; >> + phys = <&transceiver4>; >> + status = "okay"; >> +}; >> + >> &ufs_wrapper { >> status = "disabled"; >> };
| |