lkml.org 
[lkml]   [2024]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next] net: dsa: mt7530: do not set MT7530_P5_DIS when PHY muxing is being used
From
On 27.04.2024 16:31, Andrew Lunn wrote:
> On Sat, Apr 27, 2024 at 02:24:42PM +0300, Arınç ÜNAL via B4 Relay wrote:
>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>
>> When the PHY muxing feature is in use, port 5 won't be defined in the
>> device tree. Because of this, the type member of the dsa_port structure for
>> this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup()
>> function calls ds->ops->port_disable() when the port type is
>> DSA_PORT_TYPE_UNUSED.
>>
>> The MT7530_P5_DIS bit is unset when PHY muxing is being used.
>> mt7530_port_disable() which is assigned to ds->ops->port_disable() is
>> called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
>> which breaks network connectivity when PHY muxing is being used.
>>
>> Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.
>>
>> Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
>> Reported-by: Daniel Golle <daniel@makrotopia.org>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> Hello.
>>
>> I've sent this to net-next as the patch it fixes is on the current
>> development cycle.
>> ---
>> drivers/net/dsa/mt7530.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
>> index 2b9f904a98f0..07b6da3ae97c 100644
>> --- a/drivers/net/dsa/mt7530.c
>> +++ b/drivers/net/dsa/mt7530.c
>> @@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
>> if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
>> return;
>>
>> - if (port == 5)
>> + if (port == 5 && priv->p5_mode == GMAC5)
>> mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
>
>
> It might be worth a comment. It is not obvious that
> priv->p5_mode == GMAC5 means the PHY MUX is being used.
> mt7530_setup_port5() thinks it is sufficiently obscure that
> it comments each case.

priv->p5_mode == GMAC5 means PHY muxing is not being used. That is why
MT7530_P5_DIS is set when priv->p5_mode is GMAC5. Anyway, I believe this
proves your point.

Arınç

\
 
 \ /
  Last update: 2024-05-27 18:06    [W:0.035 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site