lkml.org 
[lkml]   [2024]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v4 02/12] net: ethernet: oa_tc6: implement register write operation
On Thu, Apr 18, 2024 at 06:26:38PM +0530, Parthiban Veerasooran wrote:
> Implement register write operation according to the control communication
> specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface
> document. Control write commands are used by the SPI host to write
> registers within the MAC-PHY. Each control write commands are composed of
> a 32 bits control command header followed by register write data.
>
> The MAC-PHY ignores the final 32 bits of data from the SPI host at the
> end of the control write command. The write command and data is also
> echoed from the MAC-PHY back to the SPI host to enable the SPI host to
> identify which register write failed in the case of any bus errors.
> Control write commands can write either a single register or multiple
> consecutive registers. When multiple consecutive registers are written,
> the address is automatically post-incremented by the MAC-PHY. Writing to
> any unimplemented or undefined registers shall be ignored and yield no
> effect.
>
> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>

Apart from the Return: issues:

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2024-05-27 17:59    [W:0.993 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site