lkml.org 
[lkml]   [2024]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
From
Hi Heiko,

On 4/18/24 23:03, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@cherry.de>
>
> Apart from the host-only usb3 controller (host2) the rk3588 also provides
> two dual-role controllers. On the Tiger-Haikou combination these are
> connected to the lower usb3-host port in host-only mode and the micro-usb3
> port for dual-role operation.
>
> Add the necessary controllers, phys and usb-id extcon to the Tiger-Haikou
> board. The Q7 standard defines the pin as usb-id, but it will only ever
> get used if the baseboard actually provides an OTG port. So the extcon
> stays disabled in the dtsi and only gets enabled in the haikou dts.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>

Would have preferred two separate commits but the content is fine and
it's not that difficult to review, so

Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>

Thanks,
Quentin

\
 
 \ /
  Last update: 2024-05-27 17:55    [W:0.043 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site