lkml.org 
[lkml]   [2024]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH v3 4/6] dt-bindings: clock: meson: document A1 SoC audio clock controller driver
Date

On Sat 20 Apr 2024 at 17:48, Jan Dakinevich <jan.dakinevich@salutedevices.com> wrote:

> On 4/19/24 17:06, Krzysztof Kozlowski wrote:
>> On 19/04/2024 14:58, Jan Dakinevich wrote:
>>> Add device tree bindings for A1 SoC audio clock and reset controllers.
>>>
>>> Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
>>
>> This is still RFC, so not ready.
>>
>> Limited, incomplete review follows. Full review will be provided when
>> the work is ready.
>>
>> Drop "driver" references, e.g. from subject. Bindings are about hardware.
>>
>>
>> ....
>>
>>> +
>>> + clocks:
>>> + maxItems: 26
>>> + items:
>>> + - description: input main peripheral bus clock
>>> + - description: input dds_in
>>> + - description: input fixed pll div2
>>> + - description: input fixed pll div3
>>> + - description: input hifi_pll
>>> + - description: input oscillator (usually at 24MHz)
>>> + additionalItems:
>>> + oneOf:
>>> + - description: slv_sclk[0-9] - slave bit clocks provided by external components
>>> + - description: slv_lrclk[0-9]- slave sample clocks provided by external components
>>
>> What does it mean the clocks are optional? Pins could be not routed?
>
> Yes exactly. Pins could be routed in any combination or could be not
> routed at all. It is determined by schematics and that how external
> codecs are configured.
>
>> It's really rare case that clocks within the SoC are optional, so every
>> such case is questionable.
>>
>>
>>> +
>>> + clock-names:
>>> + maxItems: 26
>>> + items:
>>> + - const: pclk
>>> + - const: dds_in
>>> + - const: fclk_div2
>>> + - const: fclk_div3
>>> + - const: hifi_pll
>>> + - const: xtal
>>> + additionalItems:
>>> + oneOf:
>>> + - pattern: "^slv_sclk[0-9]$"
>>> + - pattern: "^slv_lrclk[0-9]$"
>>> +
>>> +required:
>>> + - compatible
>>> + - '#clock-cells'
>>> + - reg
>>> + - clocks
>>> + - clock-names
>>> +
>>> +allOf:
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + const: amlogic,a1-audio-clkc
>>> + then:
>>> + required:
>>> + - '#reset-cells'
>>> + else:
>>> + properties:
>>> + '#reset-cells': false
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
>>> + #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
>>> + #include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
>>> + audio {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clkc_audio: clock-controller@fe050000 {
>>> + compatible = "amlogic,a1-audio-clkc";
>>> + reg = <0x0 0xfe050000 0x0 0xb0>;
>>> + #clock-cells = <1>;
>>> + #reset-cells = <1>;
>>> + clocks = <&clkc_audio_vad AUD_CLKID_VAD_AUDIOTOP>,
>>> + <&clkc_periphs CLKID_DDS_IN>,
>>> + <&clkc_pll CLKID_FCLK_DIV2>,
>>> + <&clkc_pll CLKID_FCLK_DIV3>,
>>> + <&clkc_pll CLKID_HIFI_PLL>,
>>> + <&xtal>;
>>> + clock-names = "pclk",
>>> + "dds_in",
>>> + "fclk_div2",
>>> + "fclk_div3",
>>> + "hifi_pll",
>>> + "xtal";
>>
>> Make it complete - list all clocks.
>>
>
> You mean, all optional clocks should be mentioned here. Right?
>
>>> + };
>>> +
>>> + clkc_audio_vad: clock-controller@fe054800 {
>>
>> Just keep one example. It's basically almost the same.
>>
>
> The worth of this duplication is to show how a clock from second
> controller (<&clkc_audio_vad AUD_CLKID_VAD_AUDIOTOP>) is used by first
> one. May be it would be better to keep it... What do you think?

If you think that is worth mentioning, make it part of the
documentation, not the example.

>
>>
>>
>> Best regards,
>> Krzysztof
>>


--
Jerome

\
 
 \ /
  Last update: 2024-04-22 09:45    [W:0.281 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site