| From | Arınç ÜNAL via B4 Relay <> | Date | Mon, 22 Apr 2024 10:15:22 +0300 | Subject | [PATCH net-next v2 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE better |
| |
From: Arınç ÜNAL <arinc.unal@arinc9.com>
Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE. Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to expose the MDIO bus of the switch. Replace the comment with a better explanation.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- drivers/net/dsa/mt7530.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 1f6cd24de4b7..2b9f904a98f0 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2635,7 +2635,10 @@ mt7531_setup(struct dsa_switch *ds) if (!priv->p5_sgmii) { mt7531_pll_setup(priv); } else { - /* Let ds->user_mii_bus be able to access external phy. */ + /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on + * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO + * to expose the MDIO bus of the switch. + */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, -- 2.40.1
|