lkml.org 
[lkml]   [2024]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v20 2/5] ring-buffer: Introducing ring-buffer mapping functions
On Thu, Apr 18, 2024 at 11:43:46PM -0400, Steven Rostedt wrote:
> On Thu, 18 Apr 2024 09:55:55 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
>
> Hi Mike,
>
> Thanks for doing this review!
>
> > > +/**
> > > + * struct trace_buffer_meta - Ring-buffer Meta-page description
> > > + * @meta_page_size: Size of this meta-page.
> > > + * @meta_struct_len: Size of this structure.
> > > + * @subbuf_size: Size of each sub-buffer.
> > > + * @nr_subbufs: Number of subbfs in the ring-buffer, including the reader.
> > > + * @reader.lost_events: Number of events lost at the time of the reader swap.
> > > + * @reader.id: subbuf ID of the current reader. ID range [0 : @nr_subbufs - 1]
> > > + * @reader.read: Number of bytes read on the reader subbuf.
> > > + * @flags: Placeholder for now, 0 until new features are supported.
> > > + * @entries: Number of entries in the ring-buffer.
> > > + * @overrun: Number of entries lost in the ring-buffer.
> > > + * @read: Number of entries that have been read.
> > > + * @Reserved1: Reserved for future use.
> > > + * @Reserved2: Reserved for future use.
> > > + */
> > > +struct trace_buffer_meta {
> > > + __u32 meta_page_size;
> > > + __u32 meta_struct_len;
> > > +
> > > + __u32 subbuf_size;
> > > + __u32 nr_subbufs;
> > > +
> > > + struct {
> > > + __u64 lost_events;
> > > + __u32 id;
> > > + __u32 read;
> > > + } reader;
> > > +
> > > + __u64 flags;
> > > +
> > > + __u64 entries;
> > > + __u64 overrun;
> > > + __u64 read;
> > > +
> > > + __u64 Reserved1;
> > > + __u64 Reserved2;
> >
> > Why do you need reserved fields? This structure always resides in the
> > beginning of a page and the rest of the page is essentially "reserved".
>
> So this code is also going to be used in arm's pkvm hypervisor code,
> where it will be using these fields, but since we are looking at
> keeping the same interface between the two, we don't want these used by
> this interface.
>
> We probably should add a comment about that.
>
> >
> > > +};
> > > +
> > > +#endif /* _TRACE_MMAP_H_ */
> > > diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
> > > index cc9ebe593571..793ecc454039 100644
> > > --- a/kernel/trace/ring_buffer.c
> > > +++ b/kernel/trace/ring_buffer.c
> >
> > ...
> >
> > > +static void rb_setup_ids_meta_page(struct ring_buffer_per_cpu *cpu_buffer,
> > > + unsigned long *subbuf_ids)
> > > +{
> > > + struct trace_buffer_meta *meta = cpu_buffer->meta_page;
> > > + unsigned int nr_subbufs = cpu_buffer->nr_pages + 1;
> > > + struct buffer_page *first_subbuf, *subbuf;
> > > + int id = 0;
> > > +
> > > + subbuf_ids[id] = (unsigned long)cpu_buffer->reader_page->page;
> > > + cpu_buffer->reader_page->id = id++;
> > > +
> > > + first_subbuf = subbuf = rb_set_head_page(cpu_buffer);
> > > + do {
> > > + if (WARN_ON(id >= nr_subbufs))
> > > + break;
> > > +
> > > + subbuf_ids[id] = (unsigned long)subbuf->page;
> > > + subbuf->id = id;
> > > +
> > > + rb_inc_page(&subbuf);
> > > + id++;
> > > + } while (subbuf != first_subbuf);
> > > +
> > > + /* install subbuf ID to kern VA translation */
> > > + cpu_buffer->subbuf_ids = subbuf_ids;
> > > +
> > > + /* __rb_map_vma() pads the meta-page to align it with the sub-buffers */
> > > + meta->meta_page_size = PAGE_SIZE << cpu_buffer->buffer->subbuf_order;
> >
> > Isn't this a single page?
>
> One thing we are doing is to make sure that the subbuffers are aligned
> by their size. If a subbuffer is 3 pages, it should be aligned on 3
> page boundaries. This was something that Linus suggested.
>
> >
> > > + meta->meta_struct_len = sizeof(*meta);
> > > + meta->nr_subbufs = nr_subbufs;
> > > + meta->subbuf_size = cpu_buffer->buffer->subbuf_size + BUF_PAGE_HDR_SIZE;
> > > +
> > > + rb_update_meta_page(cpu_buffer);
> > > +}
> >
> > ...
> >
> > > +#define subbuf_page(off, start) \
> > > + virt_to_page((void *)((start) + ((off) << PAGE_SHIFT)))
> > > +
> > > +#define foreach_subbuf_page(sub_order, start, page) \
> >
> > Nit: usually iterators in kernel use for_each
>
> Ah, good catch. Yeah, that should be changed. But then ...
>
> >
> > > + page = subbuf_page(0, (start)); \
> > > + for (int __off = 0; __off < (1 << (sub_order)); \
> > > + __off++, page = subbuf_page(__off, (start)))
> >
> > The pages are allocated with alloc_pages_node(.. subbuf_order) are
> > physically contiguous and struct pages for them are also contiguous, so
> > inside a subbuf_order allocation you can just do page++.
> >
>
> I'm wondering if we should just nuke the macro. It was there because of
> the previous implementation did things twice. But now it's just done
> once here:
>
> + while (s < nr_subbufs && p < nr_pages) {
> + struct page *page;
> +
> + foreach_subbuf_page(subbuf_order, cpu_buffer->subbuf_ids[s], page) {
> + if (p >= nr_pages)
> + break;
> +
> + pages[p++] = page;
> + }
> + s++;
> + }
>
> Perhaps that should just be:
>
> while (s < nr_subbufs && p < nr_pages) {
> struct page *page;
> int off;
>
> page = subbuf_page(0, cpu_buffer->subbuf_ids[s]);
> for (off = 0; off < (1 << subbuf_order); off++, page++, p++) {
> if (p >= nr_pages)
> break;
>
> pages[p] = page;
> }
> s++;
> }
>
> ?

Yeah, was hesitating to kill it with the last version. Happy to do it for the
next one.

>
> -- Steve

\
 
 \ /
  Last update: 2024-04-22 20:01    [W:0.062 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site