lkml.org 
[lkml]   [2024]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: display: bridge: lt8912b: document 'lontium,pn-swap' property
Date
On some HW designs, it's easier for the layout if the P/N pins are swapped.
The driver currently has a DT property to do that.

This change documents the 'lontium,pn-swap' property.

Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
---
.../devicetree/bindings/display/bridge/lontium,lt8912b.yaml | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 2cef252157985..3a804926b288a 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -24,6 +24,12 @@ properties:
maxItems: 1
description: GPIO connected to active high RESET pin.

+ lontium,pn-swap:
+ description: Swap the polarities of the P/N pins in software.
+ On some HW designs, the layout is simplified if the P/N pins
+ are inverted.
+ type: boolean
+
ports:
$ref: /schemas/graph.yaml#/properties/ports

--
2.44.0

\
 
 \ /
  Last update: 2024-05-27 16:19    [W:0.057 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site