lkml.org 
[lkml]   [2024]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/20] media: i2c: ov4689: Implement vflip/hflip controls
Date
The OV4689 sensor supports horizontal and vertical flipping. Add
appropriate controls to the driver. Toggling both array flip and
digital flip bits allows to achieve flipping while maintaining output
Bayer order. Note that the default value of hflip control corresponds
to both bits set, as it was before this patch.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
drivers/media/i2c/ov4689.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
index 8283a9ac86c9..60c60bbfe3bb 100644
--- a/drivers/media/i2c/ov4689.c
+++ b/drivers/media/i2c/ov4689.c
@@ -42,6 +42,14 @@
#define OV4689_REG_VTS CCI_REG16(0x380e)
#define OV4689_VTS_MAX 0x7fff

+#define OV4689_REG_TIMING_FORMAT1 CCI_REG8(0x3820) /* Vertical */
+#define OV4689_REG_TIMING_FORMAT2 CCI_REG8(0x3821) /* Horizontal */
+#define OV4689_TIMING_FLIP_MASK GENMASK(2, 1)
+#define OV4689_TIMING_FLIP_ARRAY BIT(1)
+#define OV4689_TIMING_FLIP_DIGITAL BIT(2)
+#define OV4689_TIMING_FLIP_BOTH (OV4689_TIMING_FLIP_ARRAY |\
+ OV4689_TIMING_FLIP_DIGITAL)
+
#define OV4689_REG_TEST_PATTERN CCI_REG8(0x5040)
#define OV4689_TEST_PATTERN_ENABLE 0x80
#define OV4689_TEST_PATTERN_DISABLE 0x0
@@ -183,7 +191,6 @@ static const struct cci_reg_sequence ov4689_2688x1520_regs[] = {
{CCI_REG8(0x3811), 0x08}, /* H_WIN_OFF_L h_win_off[7:0] = 0x08*/
{CCI_REG8(0x3813), 0x04}, /* V_WIN_OFF_L v_win_off[7:0] = 0x04 */
{CCI_REG8(0x3819), 0x01}, /* VSYNC_END_L vsync_end_point[7:0] = 0x01 */
- {CCI_REG8(0x3821), 0x06}, /* TIMING_FORMAT2 array_h_mirror = 1, digital_h_mirror = 1 */

/* OTP control */
{CCI_REG8(0x3d85), 0x36}, /* OTP_REG85 OTP_power_up_load_setting_enable = 1,
@@ -607,6 +614,16 @@ static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl)
(ctrl->val + ov4689->cur_mode->width) /
OV4689_HTS_DIVIDER, &ret);
break;
+ case V4L2_CID_VFLIP:
+ cci_update_bits(regmap, OV4689_REG_TIMING_FORMAT1,
+ OV4689_TIMING_FLIP_MASK,
+ ctrl->val ? OV4689_TIMING_FLIP_BOTH : 0, &ret);
+ break;
+ case V4L2_CID_HFLIP:
+ cci_update_bits(regmap, OV4689_REG_TIMING_FORMAT2,
+ OV4689_TIMING_FLIP_MASK,
+ ctrl->val ? 0 : OV4689_TIMING_FLIP_BOTH, &ret);
+ break;
default:
dev_warn(dev, "%s Unhandled id:0x%x, val:0x%x\n",
__func__, ctrl->id, ctrl->val);
@@ -637,7 +654,7 @@ static int ov4689_initialize_controls(struct ov4689 *ov4689)

handler = &ov4689->ctrl_handler;
mode = ov4689->cur_mode;
- ret = v4l2_ctrl_handler_init(handler, 10);
+ ret = v4l2_ctrl_handler_init(handler, 12);
if (ret)
return ret;

@@ -677,6 +694,9 @@ static int ov4689_initialize_controls(struct ov4689 *ov4689)
ARRAY_SIZE(ov4689_test_pattern_menu) - 1,
0, 0, ov4689_test_pattern_menu);

+ v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+
if (handler->error) {
ret = handler->error;
dev_err(ov4689->dev, "Failed to init controls(%d)\n", ret);
--
2.44.0

\
 
 \ /
  Last update: 2024-04-02 18:49    [W:0.896 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site