lkml.org 
[lkml]   [2024]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
On 11:12-20240402, Nishanth Menon wrote:
> On 09:08-20240402, Nathan Morrisson wrote:
> > The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which
> > support CAN FD at 8 Mbps.
> >
> > Increase the maximum bitrate to 8 Mbps.
> >
> > Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
> > ---
> > arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> > index 8237b8c815b8..522699ec65e8 100644
> > --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> > +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> > @@ -42,7 +42,7 @@ can_tc1: can-phy0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&can_tc1_pins_default>;
> > #phy-cells = <0>;
> > - max-bitrate = <5000000>;
> > + max-bitrate = <8000000>;
> > standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
> > };
> >
> > @@ -51,7 +51,7 @@ can_tc2: can-phy1 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&can_tc2_pins_default>;
> > #phy-cells = <0>;
> > - max-bitrate = <5000000>;
> > + max-bitrate = <8000000>;
> > standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
> > };
> >
> > --
> > 2.25.1
> >
>



> This is better at arch/arm64/boot/dts/ti/k3-am62p-main.dtsi.
>

Woops.. wrong mail thread. :( Apologies on the spam.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D

\
 
 \ /
  Last update: 2024-05-27 16:19    [W:0.187 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site