lkml.org 
[lkml]   [2024]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 3/3] Input: Add TouchNetix axiom i2c touchscreen driver
Hi Kamel,

thank you for the patch. Again just a rough review.

On 24-04-19, Kamel Bouhara wrote:
> Add a new driver for the TouchNetix's axiom family of
> touchscreen controllers. This driver only supports i2c
> and can be later adapted for SPI and USB support.
>
> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> ---

..

> +static int axiom_i2c_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct input_dev *input_dev;
> + struct axiom_data *ts;
> + u32 poll_interval;
> + int target;
> + int error;
> +
> + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> + if (!ts)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, ts);
> + ts->client = client;
> + ts->dev = dev;
> +
> + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config);
> + error = PTR_ERR_OR_ZERO(ts->regmap);
> + if (error) {
> + dev_err(dev, "Failed to initialize regmap: %d\n", error);
> + return error;
> + }
> +
> + ts->vddi = devm_regulator_get(dev, "VDDI");

This does not match the dt-bindings.

> + if (IS_ERR(ts->vddi))
> + return dev_err_probe(&client->dev, PTR_ERR(ts->vddi),
> + "Failed to enable VDDI regulator\n");
> +
> + ts->vdda = devm_regulator_get(dev, "VDDA");

Here as well.

> + if (IS_ERR(ts->vdda))
> + return dev_err_probe(&client->dev, PTR_ERR(ts->vdda),
> + "Failed to enable VDDA regulator\n");

Now we handle it as always but..

> + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ts->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n");
> +
> + if (ts->reset_gpio)
> + axiom_reset(ts->reset_gpio);
> + else
> + msleep(AXIOM_STARTUP_TIME_MS);

still the reset is useless since you never enabled the regulators. So
either use devm_regulator_get_enable() or you do the enable/disable
separate via regulator_enable()/disable(). If there are no strict
enablement restrictions like orders and timings you could also make use
of the regulator_bulk API (e.g. devm_regulator_bulk_get_enable).

Regards,
Marco

> +
> + error = axiom_discover(ts);
> + if (error)
> + return dev_err_probe(dev, error, "Failed touchscreen discover\n");
> +
> + input_dev = devm_input_allocate_device(ts->dev);
> + if (!input_dev)
> + return -ENOMEM;
> +
> + input_dev->name = "TouchNetix axiom Touchscreen";
> + input_dev->phys = "input/axiom_ts";
> +
> + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0);
> + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0);
> +
> + touchscreen_parse_properties(input_dev, true, &ts->prop);
> +
> + /* Registers the axiom device as a touchscreen instead of a mouse pointer */
> + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT);
> + if (error)
> + return error;
> +
> + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */
> + set_bit(EV_REL, input_dev->evbit);
> + set_bit(EV_MSC, input_dev->evbit);
> + /* Declare that we support "RAW" Miscellaneous events */
> + set_bit(MSC_RAW, input_dev->mscbit);
> +
> + ts->input_dev = input_dev;
> + input_set_drvdata(ts->input_dev, ts);
> +
> + /* Ensure that all reports are initialised to not be present. */
> + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++)
> + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT;
> +
> + error = devm_request_threaded_irq(dev, client->irq, NULL,
> + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts);
> + if (error) {
> + dev_info(dev, "Request irq failed, falling back to polling mode");
> +
> + error = input_setup_polling(input_dev, axiom_i2c_poll);
> + if (error)
> + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n");
> +
> + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval))
> + input_set_poll_interval(input_dev, poll_interval);
> + else
> + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS);
> + }
> +
> + return input_register_device(input_dev);
> +}
> +
> +static const struct i2c_device_id axiom_i2c_id_table[] = {
> + { "ax54a" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table);
> +
> +static const struct of_device_id axiom_i2c_of_match[] = {
> + { .compatible = "touchnetix,ax54a", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match);
> +
> +static struct i2c_driver axiom_i2c_driver = {
> + .driver = {
> + .name = "axiom",
> + .of_match_table = axiom_i2c_of_match,
> + },
> + .id_table = axiom_i2c_id_table,
> + .probe = axiom_i2c_probe,
> +};
> +module_i2c_driver(axiom_i2c_driver);
> +
> +MODULE_AUTHOR("Bart Prescott <bartp@baasheep.co.uk>");
> +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@touchnetix.com>");
> +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@touchnetix.com>");
> +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@touchnetix.com>");
> +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
> +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2024-04-19 11:28    [W:0.065 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site