lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3
    The data-lanes are a property of the out remote endpoint, so move them
    from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
    mdss_dp3_out and make sure to include all frequencies.

    Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
    Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
    ---
    arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
    1 file changed, 3 insertions(+), 2 deletions(-)

    diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
    index d4198fa204fd..c5c2895b37c7 100644
    --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
    +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
    @@ -599,8 +599,6 @@ &mdss_dp3 {
    compatible = "qcom,x1e80100-dp";
    /delete-property/ #sound-dai-cells;

    - data-lanes = <0 1 2 3>;
    -
    status = "okay";

    aux-bus {
    @@ -620,6 +618,9 @@ ports {
    port@1 {
    reg = <1>;
    mdss_dp3_out: endpoint {
    + data-lanes = <0 1 2 3>;
    + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
    +
    remote-endpoint = <&edp_panel_in>;
    };
    };
    --
    2.34.1


    \
     
     \ /
      Last update: 2024-04-18 12:23    [W:3.281 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site