lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] drm/msm/dpu: Rename `ctx` parameter to `intf` to match other functions
On Wed, Apr 17, 2024 at 01:57:47AM +0200, Marijn Suijten wrote:
> All other functions in dpu_hw_intf name the "self" parameter `intf`,
> except dpu_hw_intf_setup_timing_engine() and the recently added
> dpu_hw_intf_program_intf_cmd_cfg(). Clean that up for consistency.

I really have mixed feelings towards such patches. On one hand it
improves readability, on the other hand, it's just a name, it has no
specific value.

Still:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 965692ef7892..34d0c4e04d27 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -96,11 +96,11 @@
> #define INTF_CFG2_DCE_DATA_COMPRESS BIT(12)
>
>
> -static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
> +static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *intf,
> const struct dpu_hw_intf_timing_params *p,
> const struct dpu_format *fmt)
> {
> - struct dpu_hw_blk_reg_map *c = &ctx->hw;
> + struct dpu_hw_blk_reg_map *c = &intf->hw;
> u32 hsync_period, vsync_period;
> u32 display_v_start, display_v_end;
> u32 hsync_start_x, hsync_end_x;
> @@ -118,7 +118,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
> /* read interface_cfg */
> intf_cfg = DPU_REG_READ(c, INTF_CONFIG);
>
> - if (ctx->cap->type == INTF_DP)
> + if (intf->cap->type == INTF_DP)
> dp_intf = true;
>
> hsync_period = p->hsync_pulse_width + p->h_back_porch + p->width +
> @@ -223,7 +223,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
> DPU_REG_WRITE(c, INTF_FRAME_LINE_COUNT_EN, 0x3);
> DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
> DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
> - if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
> + if (intf->cap->features & BIT(DPU_DATA_HCTL_EN)) {
> /*
> * DATA_HCTL_EN controls data timing which can be different from
> * video timing. It is recommended to enable it for all cases, except
> @@ -518,10 +518,10 @@ static void dpu_hw_intf_disable_autorefresh(struct dpu_hw_intf *intf,
>
> }
>
> -static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
> +static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *intf,
> struct dpu_hw_intf_cmd_mode_cfg *cmd_mode_cfg)
> {
> - u32 intf_cfg2 = DPU_REG_READ(&ctx->hw, INTF_CONFIG2);
> + u32 intf_cfg2 = DPU_REG_READ(&intf->hw, INTF_CONFIG2);
>
> if (cmd_mode_cfg->data_compress)
> intf_cfg2 |= INTF_CFG2_DCE_DATA_COMPRESS;
> @@ -529,7 +529,7 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
> if (cmd_mode_cfg->wide_bus_en)
> intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
>
> - DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
> + DPU_REG_WRITE(&intf->hw, INTF_CONFIG2, intf_cfg2);
> }
>
> struct dpu_hw_intf *dpu_hw_intf_init(struct drm_device *dev,
>
> --
> 2.44.0
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2024-04-18 01:33    [W:0.142 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site