lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] at24: fix memory corruption race condition
nvmem devices allow for linking by name in the DTS which doesn't
create a dependency in the probe order.

What happens is driver B probe starts shortly after the eeprom
probe and calls of_nvmem_device_get. Since a device is
registered it starts using it; however if the eeprom isn't there
then the read will fail and it will start tearing down the resources.
Driver B will now access invalid memory causing a kernel panic.

Daniel


On Wed, Apr 17, 2024 at 5:23 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> On Thu, Apr 18, 2024 at 1:59 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> >
> > On Thu, Apr 18, 2024 at 1:07 AM Daniel Okazaki <dtokazaki@google.com> wrote:
> > >
> > > If the eeprom is not accessible, an nvmem device will be registered, the
> > > read will fail, and the device will be torn down. If another driver
> > > accesses the nvmem device after the teardown, it will reference
> > > invalid memory.
> > >
> > > Move the failure point before registering the nvmem device.
> > >
> > > Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
> > > ---
> > > drivers/misc/eeprom/at24.c | 18 +++++++++---------
> > > 1 file changed, 9 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> > > index 572333ead5fb..4bd4f32bcdab 100644
> > > --- a/drivers/misc/eeprom/at24.c
> > > +++ b/drivers/misc/eeprom/at24.c
> > > @@ -758,15 +758,6 @@ static int at24_probe(struct i2c_client *client)
> > > }
> > > pm_runtime_enable(dev);
> > >
> > > - at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
> > > - if (IS_ERR(at24->nvmem)) {
> > > - pm_runtime_disable(dev);
> > > - if (!pm_runtime_status_suspended(dev))
> > > - regulator_disable(at24->vcc_reg);
> > > - return dev_err_probe(dev, PTR_ERR(at24->nvmem),
> > > - "failed to register nvmem\n");
> > > - }
> > > -
> > > /*
> > > * Perform a one-byte test read to verify that the chip is functional,
> > > * unless powering on the device is to be avoided during probe (i.e.
> > > @@ -782,6 +773,15 @@ static int at24_probe(struct i2c_client *client)
> > > }
> > > }
> > >
> > > + at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
> > > + if (IS_ERR(at24->nvmem)) {
> > > + pm_runtime_disable(dev);
> > > + if (!pm_runtime_status_suspended(dev))
> > > + regulator_disable(at24->vcc_reg);
> > > + return dev_err_probe(dev, PTR_ERR(at24->nvmem),
> > > + "failed to register nvmem\n");
> > > + }
> > > +
> > > /* If this a SPD EEPROM, probe for DDR3 thermal sensor */
> > > if (cdata == &at24_data_spd)
> > > at24_probe_temp_sensor(client);
> > > --
> > > 2.44.0.683.g7961c838ac-goog
> > >
> >
> > Looks good, can you add a Fixes tag?
> >
> > Thanks,
> > Bartosz
>
> Wait... While the patch is still correct - we shouldn't needlessly
> create the nvmem device - why would anything crash? Looks like a
> problem with nvmem then? How did you trigger this issue?
>
> Bart

\
 
 \ /
  Last update: 2024-04-18 19:13    [W:0.207 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site