lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
On Wed, Apr 17, 2024 at 03:51:10PM +0200, Pratik Farkase wrote:
> Convert the Broadcom BCM2835 Auxiliary UART to newer DT schema.
> Created DT schema based on the .txt file which had
> `compatible`, `reg` `clocks` and `interrupts` as the
> required properties. This binding is used by Broadcom BCM2835
> SOC used in some Raspberry PI boards.
> Changes from original file:
> Implemented complete example which the original txt binding lacked.
>
> Signed-off-by: Pratik Farkase <pratik.farkase@wsisweden.com>
> ---
> Changes in v2
> - Updated Maintainers list according to feedback
> - Fixed typo `Auxiliar` to `Auxiliary`
> ---
> ---
> .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 -------
> .../serial/brcm,bcm2835-aux-uart.yaml | 48 +++++++++++++++++++
> 2 files changed, 48 insertions(+), 18 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
>
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> deleted file mode 100644
> index b5cc6297cd1b..000000000000
> --- a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -* BCM2835 AUXILIAR UART
> -
> -Required properties:
> -
> -- compatible: "brcm,bcm2835-aux-uart"
> -- reg: The base address of the UART register bank.
> -- interrupts: A single interrupt specifier.
> -- clocks: Clock driving the hardware; used to figure out the baud rate
> - divisor.
> -
> -Example:
> -
> - uart1: serial@7e215040 {
> - compatible = "brcm,bcm2835-aux-uart";
> - reg = <0x7e215040 0x40>;
> - interrupts = <1 29>;
> - clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> - };
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> new file mode 100644
> index 000000000000..5d4d37371d6b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BCM2835 AUXILIARY UART
> +
> +maintainers:
> + - Pratik Farkase <pratikfarkase94@gmail.com>
> + - Florian Fainelli <florian.fainelli@broadcom.com>
> + - Stefan Wahren <wahrenst@gmx.net>
> +
> +allOf:
> + - $ref: serial.yaml
> +
> +properties:
> + compatible:
> + const: brcm,bcm2835-aux-uart
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm2835.h>
> + #include <dt-bindings/clock/bcm2835-aux.h>
> + #include <dt-bindings/interrupt-controller/irq.h>

Only 1 of these headers seems used, there's only one define below.

> + uart1: serial@7e215040 {

The label is unused and can be dropped.

Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>


> + compatible = "brcm,bcm2835-aux-uart";
> + reg = <0x7e215040 0x40>;
> + interrupts = <1 29>;
> + clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> + };
> --
> 2.34.1
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2024-04-17 16:54    [W:0.054 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site