lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v1 1/1] soundwire: qcom: disable stop clock on 1.3.0 and below
From


On 13/04/2024 07:42, Anton Bambura wrote:
> This patch returns back the behavior of disabling stop clock on soundwire
> 1.3.0 and below which seems to have been altered by accident which
> results in broken audio on sdm845 + wcd9340. For example, on AYN Odin and
> Lenovo Yoga C630 devices.
>
> Fixes: 4830bfa2c812 ("soundwire: qcom: set clk stop need reset flag at runtime")
> Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
> ---
> drivers/soundwire/qcom.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index a1e2d6c98186..bc03484a28e8 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -628,6 +628,9 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus)
> }
> }
>
> + if (ctrl->version <= SWRM_VERSION_1_3_0)
> + ctrl->clock_stop_not_supported = true;
> +

This is not the right fix, this can be determined from codec
clk_stop_mode1 flag.

can you try this patch:

----------------------------->cut<-----------------------------
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 17 Apr 2024 12:38:49 +0100
Subject: [PATCH] ASoC: codecs: wsa881x: set clk_stop_mode1 flag

WSA881x codecs do not retain the state while clock is stopped, so mark
this with clk_stop_mode1 flag.

Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/codecs/wsa881x.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index 3c025dabaf7a..1253695bebd8 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -1155,6 +1155,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+ pdev->prop.clk_stop_mode1 = true;
gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val);

wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
--
2.21.0
----------------------------->cut<-----------------------------

thanks,
Srini

> if (!found) {
> qcom_swrm_set_slave_dev_num(bus, NULL, i);
> sdw_slave_add(bus, &id, NULL);

\
 
 \ /
  Last update: 2024-04-17 13:43    [W:0.055 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site