lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/9] spi: pxa2xx: Drop struct pxa2xx_spi_chip
Date
No more users.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/spi/spi-pxa2xx-dma.c | 9 ++-------
drivers/spi/spi-pxa2xx.c | 25 -------------------------
drivers/spi/spi-pxa2xx.h | 14 --------------
3 files changed, 2 insertions(+), 46 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 751cb0f77b62..d77279c3acd8 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -231,16 +231,11 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
u8 bits_per_word, u32 *burst_code,
u32 *threshold)
{
- struct pxa2xx_spi_chip *chip_info = spi->controller_data;
struct driver_data *drv_data = spi_controller_get_devdata(spi->controller);
u32 dma_burst_size = drv_data->controller_info->dma_burst_size;

- /*
- * If the DMA burst size is given in chip_info we use that,
- * otherwise we use the default. Also we use the default FIFO
- * thresholds for now.
- */
- *burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size;
+ /* We use the default the DMA burst size and FIFO thresholds for now */
+ *burst_code = dma_burst_size;
*threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
| SSCR1_TxTresh(TX_THRESH_DFLT);

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index cc0e54f8d2c3..00aa33c937bf 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1154,7 +1154,6 @@ static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller)

static int setup(struct spi_device *spi)
{
- struct pxa2xx_spi_chip *chip_info;
struct chip_data *chip;
const struct lpss_config *config;
struct driver_data *drv_data =
@@ -1218,25 +1217,6 @@ static int setup(struct spi_device *spi)
chip->timeout = TIMOUT_DFLT;
}

- /*
- * Protocol drivers may change the chip settings, so...
- * if chip_info exists, use it.
- */
- chip_info = spi->controller_data;
-
- /* chip_info isn't always needed */
- if (chip_info) {
- if (chip_info->timeout)
- chip->timeout = chip_info->timeout;
- if (chip_info->tx_threshold)
- tx_thres = chip_info->tx_threshold;
- if (chip_info->tx_hi_threshold)
- tx_hi_thres = chip_info->tx_hi_threshold;
- if (chip_info->rx_threshold)
- rx_thres = chip_info->rx_threshold;
- chip->dma_threshold = 0;
- }
-
chip->cr1 = 0;
if (spi_controller_is_target(drv_data->controller)) {
chip->cr1 |= SSCR1_SCFR;
@@ -1256,11 +1236,6 @@ static int setup(struct spi_device *spi)
chip->lpss_tx_threshold = tx_thres;
}

- /*
- * Set DMA burst and threshold outside of chip_info path so that if
- * chip_info goes away after setting chip->enable_dma, the burst and
- * threshold can still respond to changes in bits_per_word.
- */
if (chip->enable_dma) {
/* Set up legal burst and threshold for DMA */
if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index f1097c96c50f..ae9c99bc9f6c 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -35,20 +35,6 @@ struct pxa2xx_spi_controller {
struct ssp_device ssp;
};

-/*
- * The controller specific data for SPI target devices
- * (resides in spi_board_info.controller_data),
- * copied to spi_device.platform_data ... mostly for
- * DMA tuning.
- */
-struct pxa2xx_spi_chip {
- u8 tx_threshold;
- u8 tx_hi_threshold;
- u8 rx_threshold;
- u8 dma_burst_size;
- u32 timeout;
-};
-
struct spi_controller;
struct spi_device;
struct spi_transfer;
--
2.43.0.rc1.1336.g36b5255a03ac

\
 
 \ /
  Last update: 2024-04-17 13:05    [W:0.173 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site