lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
On Fri, Apr 12, 2024 at 03:02:47PM +0530, Varadarajan Narayanan wrote:
> On Wed, Apr 10, 2024 at 02:01:00PM +0200, Krzysztof Kozlowski wrote:
> > On 10/04/2024 13:48, Konrad Dybcio wrote:
> > >
> > >
> > > On 4/10/24 13:15, Krzysztof Kozlowski wrote:
> > >> On 10/04/2024 12:02, Varadarajan Narayanan wrote:
> > >>>> Okay, so what happens if icc-clk way of generating them changes a bit?
> > >>>> It can change, why not, driver implementation is not an ABI.
> > >>>>
> > >>>>>
> > >>>>> 2. These auto-generated id-numbers have to be correctly
> > >>>>> tied to the DT nodes. Else, the relevant clocks may
> > >>>>> not get enabled.
> > >>>>
> > >>>> Sorry, I don't get, how auto generated ID number is tied to DT node.
> > >>>> What DT node?
> > >>>
> > >>> I meant the following usage for the 'interconnects' entry of the
> > >>> consumer peripheral's node.
> > >>>
> > >>> interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
> > >>> ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^
> > >>> <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
> > >>> ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^
> > >>>
> > >>>>> Since ICC-CLK creates two ids per clock entry (one MASTER_xxx and
> > >>>>> one SLAVE_xxx), using those MASTER/SLAVE_xxx macros as indices in
> > >>>>> the below array would create holes.
> > >>>>>
> > >>>>> static int icc_ipq9574_hws[] = {
> > >>>>> [MASTER_ANOC_PCIE0] = GCC_ANOC_PCIE0_1LANE_M_CLK,
> > >>>>> [MASTER_SNOC_PCIE0] = GCC_SNOC_PCIE0_1LANE_S_CLK,
> > >>>>> [MASTER_ANOC_PCIE1] = GCC_ANOC_PCIE1_1LANE_M_CLK,
> > >>>>> [MASTER_SNOC_PCIE1] = GCC_SNOC_PCIE1_1LANE_S_CLK,
> > >>>>> . . .
> > >>>>> };
> > >>>>>
> > >>>>> Other Qualcomm drivers don't have this issue and they can
> > >>>>> directly use the MASTER/SLAVE_xxx macros.
> > >>>>
> > >>>> I understand, thanks, yet your last patch keeps adding fake IDs, means
> > >>>> IDs which are not part of ABI.
> > >>>>
> > >>>>>
> > >>>>> As the MASTER_xxx macros cannot be used, have to define a new set
> > >>>>> of macros that can be used for indices in the above array. This
> > >>>>> is the reason for the ICC_BINDING_NAME macros.
> > >>>>
> > >>>> Then maybe fix the driver, instead of adding something which is not an
> > >>>> ABI to bindings and completely skipping the actual ABI.
> > >>>
> > >>> Will remove the ICC_xxx defines from the header. And in the
> > >>> driver will change the declaration as follows. Will that be
> > >>> acceptable?
> > >>>
> > >>> static int icc_ipq9574_hws[] = {
> > >>> [MASTER_ANOC_PCIE0 / 2] = GCC_ANOC_PCIE0_1LANE_M_CLK,
> > >>
> > >> What is the binding in such case? What exactly do you bind between
> > >> driver and DTS?
> > >
> > > I think what Krzysztof is trying to say here is "the icc-clk API is tragic"
> > > and the best solution would be to make it such that the interconnect indices
> > > are set explicitly, instead of (master, slave), (master, slave) etc.
> > >
> > > Does that sound good, Krzysztof?
> >
> > Yes, I think earlier I expressed that icc-clk might needs fixes.
>
> Ok
>
> > The indices you define in the binding must be used by DTS and by the driver.
>
> There are 3 drivers in play here.
> 1. The icc-clk driver
> 2. The gcc (i.e. the interconnect driver)
> 3. The consumer peripheral's driver
>
> By 'driver' I assume, you mean the icc-clk driver.
>
> > Directly, otherwise it is error-prone and not really an ABI...
>
> To address this, will modify the icc-clk driver as follows.
>
> ==========================================
> diff --git a/include/linux/interconnect-clk.h b/include/linux/interconnect-clk.h
> index 5c611a8b0892..9bcee3e9c56c 100644
> --- a/include/linux/interconnect-clk.h
> +++ b/include/linux/interconnect-clk.h
> @@ -11,6 +11,8 @@ struct device;
> struct icc_clk_data {
> struct clk *clk;
> const char *name;
> + unsigned int master_id;
> + unsigned int slave_id;
> };
>
>
> diff --git a/drivers/interconnect/icc-clk.c b/drivers/interconnect/icc-clk.c
> index bce946592c98..f788db15cd76 100644
> --- a/drivers/interconnect/icc-clk.c
> +++ b/drivers/interconnect/icc-clk.c
> @@ -108,7 +108,7 @@ struct icc_provider *icc_clk_register(struct device *dev,
> for (i = 0, j = 0; i < num_clocks; i++) {
> qp->clocks[i].clk = data[i].clk;
>
> - node = icc_node_create(first_id + j);
> + node = icc_node_create(first_id + data[i].master_id);
> if (IS_ERR(node)) {
> ret = PTR_ERR(node);
> goto err;
> @@ -118,10 +118,10 @@ struct icc_provider *icc_clk_register(struct device *dev,
> node->data = &qp->clocks[i];
> icc_node_add(node, provider);
> /* link to the next node, slave */
> - icc_link_create(node, first_id + j + 1);
> + icc_link_create(node, first_id + data[i].slave_id);
> onecell->nodes[j++] = node;
>
> - node = icc_node_create(first_id + j);
> + node = icc_node_create(first_id + data[i].slave_id);
> if (IS_ERR(node)) {
> ret = PTR_ERR(node);
> goto err;
> ==========================================
>
> And update the inputs going from gcc-ipq9574.c accordingly
> to use the MASTER_xxx and SLAVE_xxx defines. Will this be ok?
>
> Konrad & Krzysztof kindly let me know.

Have addressed these and other comments and posted v8.
Please review.

Thanks
Varada

\
 
 \ /
  Last update: 2024-04-17 12:59    [W:0.271 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site