lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] riscv: dts: sophgo: add initial Milk-V Duo S board support
On Wed, Apr 17, 2024 at 08:53:11AM GMT, michael.opdenacker@bootlin.com wrote:
> From: Michael Opdenacker <michael.opdenacker@bootlin.com>
>
> This adds initial support for the Milk-V Duo S board
> (https://milkv.io/duo-s), enabling the serial port,
> making it possible to boot Linux to the command line.
>
> Link: https://lore.kernel.org/linux-riscv/171266958507.1032617.9460749136730849811.robh@kernel.org/T/#t
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
> ---
> arch/riscv/boot/dts/sophgo/Makefile | 1 +
> .../boot/dts/sophgo/sg2000-milkv-duos.dts | 34 +++++++++++++++++++
> 2 files changed, 35 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
>
> diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
> index 57ad82a61ea6..e008acb5240f 100644
> --- a/arch/riscv/boot/dts/sophgo/Makefile
> +++ b/arch/riscv/boot/dts/sophgo/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
> dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
> +dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duos.dtb
> dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
> diff --git a/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> new file mode 100644
> index 000000000000..c1ecf97d5e93
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2024 Michael Opdenacker <michael.opdenacker@bootlin.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "cv1812h.dtsi"
> +
> +/ {
> + model = "Milk-V Duo S";
> + compatible = "milkv,duos", "sophgo,cv1812h";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };

Add a cpu specific file, and move this to it.

> +};
> +
> +&osc {
> + clock-frequency = <25000000>;
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> --
> 2.34.1
>

Add necessary DT node in the cpu specific file. (clint,
plic and clk). You also need to rebase your patch based
on sophgo/for-next.


\
 
 \ /
  Last update: 2024-04-17 11:35    [W:0.082 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site