lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] arm64: dts: qcom: Add SM8550 Xperia 1 V
W dniu 2024-02-12 14:10, Konrad Dybcio napisał(a):
> Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part
> of the SoMC SM8550 Yodo platform.
>
> This commit brings support for:
> * Remoteprocs (sans modem for now)
> * Flash LED (the notification LED is gone :((((()
> * SD Card
> * USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a
> replug
> with an cable flip sometimes..)
> * Most regulators
> * Part of I2C-connected peripherals (notably no touch due to a
> driver bug)
> * PCIe0 (PCIe1 is unused)
>
> Do note display via simplefb is not supported, as the display is
> blanked
> upon exiting XBL.
>

I also noticed such behaviour on my S24 Ultra. I was pointed out by
Xilin Wu that on SM8450 or
newer, the display will be turned off by the bootloader if the node
'/reserved-memory/splash_region'
does not exist in the device tree. Adding it in the device tree for my
phone made the bootloader
leave the display on. Maybe it's the same case here?

https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/blob/LA.VENDOR.1.0.r2-09400-WAIPIO.QSSI14.0/QcomModulePkg/Library/BootLib/UpdateDeviceTree.c?ref_type=tags#L220

> To create a working boot image, you need to run:
> cat arch/arm64/boot/Image.gz
> arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\
> yodo-pdx234.dtb > .Image.gz-dtb
>
> mkbootimg \
> --kernel .Image.gz-dtb \
> --ramdisk some_initrd.img \
> --pagesize 4096 \
> --base 0x0 \
> --kernel_offset 0x8000 \
> --ramdisk_offset 0x1000000 \
> --tags_offset 0x100 \
> --cmdline "SOME_CMDLINE" \
> --dtb_offset 0x1f00000 \
> --header_version 2 \
> -o boot.img-sony-xperia-pdx234
>
> Then, you need to flash it on the device and get rid of all the
> vendor_boot/dtbo mess:
>
> // You have to either pull vbmeta{"","_system"} from
> // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build
> process
> fastboot --disable-verity --disable-verification flash vbmeta
> vbmeta.img
> fastboot --disable-verity --disable-verification flash vbmeta_system \
> vbmeta_system.img
>
> fastboot flash boot boot.img-sony-xperia-pdx234
> fastboot erase vendor_boot
> fastboot erase recovery
> fastboot flash dtbo emptydtbo.img
> fastboot erase init_boot // ? I don't remember if it's necessary, sorry
> fastboot continue
>
> Where emptydtbo.img is a tiny file that consists of 2 bytes (all
> zeroes), doing
> a "fastboot erase" won't cut it, the bootloader will go crazy and
> things will
> fall apart when it tries to overlay random bytes from an empty
> partition onto a
> perfectly good appended DTB.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 779
> +++++++++++++++++++++
> 2 files changed, 780 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile
> b/arch/arm64/boot/dts/qcom/Makefile
> index f7c5662213e4..9bbea531660d 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
> sm8450-sony-xperia-nagara-pdx224.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
> diff --git
> a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> new file mode 100644
> index 000000000000..85e0d3d66e16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
> @@ -0,0 +1,779 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/sound/cs35l45.h>
> +#include "sm8550.dtsi"
> +#include "pm8010.dtsi"
> +#include "pm8550.dtsi"
> +#include "pm8550b.dtsi"
> +#define PMK8550VE_SID 5
> +#include "pm8550ve.dtsi"
> +#include "pm8550vs.dtsi"
> +#include "pmk8550.dtsi"
> +/* TODO: Only one SID of PMR735D seems accessible? */
> +
> +/delete-node/ &hwfence_shbuf;
> +/delete-node/ &mpss_mem;
> +/delete-node/ &rmtfs_mem;
> +/ {
> + model = "Sony Xperia 1 V";
> + compatible = "sony,pdx234", "qcom,sm8550";
> + chassis-type = "handset";
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c4 = &i2c4;
> + i2c10 = &i2c10;
> + i2c11 = &i2c11;
> + i2c16 = &i2c_hub_2;
> + serial0 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + label = "gpio-keys";
> +
> + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
> + pinctrl-names = "default";
> +
> + key-camera-focus {
> + label = "Camera Focus";
> + linux,code = <KEY_CAMERA_FOCUS>;
> + gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> +
> + key-camera-snapshot {
> + label = "Camera Snapshot";
> + gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_CAMERA>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> +
> + key-volume-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + pmic-glink {
> + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
> + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_hs_in: endpoint {
> + remote-endpoint = <&usb_1_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss_in: endpoint {
> + remote-endpoint = <&usb_dp_qmpphy_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + reserved-memory {
> + mpss_mem: mpss-region@89800000 {
> + reg = <0x0 0x89800000 0x0 0x10800000>;
> + no-map;
> + };
> +
> + splash@b8000000 {
> + reg = <0x0 0xb8000000 0x0 0x2b00000>;
> + no-map;
> + };
> +
> + hwfence_shbuf: hwfence-shbuf-region@e6440000 {
> + reg = <0x0 0xe6440000 0x0 0x2dd000>;
> + no-map;
> + };
> +
> + rmtfs_mem: memory@f8b00000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0xf8b00000 0x0 0x280000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
> + };
> +
> + ramoops@ffd00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xffd00000 0x0 0xc0000>;
> + console-size = <0x40000>;
> + record-size = <0x1000>;
> + pmsg-size = <0x40000>;
> + ecc-size = <16>;
> + };
> +
> + rdtag-store-region@ffdc0000 {
> + reg = <0x0 0xffdc0000 0x0 0x40000>;
> + no-map;
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + pm8550_bob1: bob1 {
> + regulator-name = "pm8550_bob1";
> + regulator-min-microvolt = <3416000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver
> constraints */
> +
> + pm8550_l1: ldo1 {
> + regulator-name = "pm8550_l1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l2: ldo2 {
> + regulator-name = "pm8550_l2";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L4 exists in cmd-db, but the board seems to crash on access */
> +
> + pm8550_l5: ldo5 {
> + regulator-name = "pm8550_l5";
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l6: ldo6 {
> + regulator-name = "pm8550_l6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l7: ldo7 {
> + regulator-name = "pm8550_l7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l8: ldo8 {
> + regulator-name = "pm8550_l8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l9: ldo9 {
> + regulator-name = "pm8550_l9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l10: ldo10 {
> + regulator-name = "pm8550_l10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l11: ldo11 {
> + regulator-name = "pm8550_l11";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l12: ldo12 {
> + regulator-name = "pm8550_l12";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l13: ldo13 {
> + regulator-name = "pm8550_l13";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l14: ldo14 {
> + regulator-name = "pm8550_l14";
> + regulator-min-microvolt = <3304000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l15: ldo15 {
> + regulator-name = "pm8550_l15";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l16: ldo16 {
> + regulator-name = "pm8550_l16";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550_l17: ldo17 {
> + regulator-name = "pm8550_l17";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + pm8550vs_0_l1: ldo1 {
> + regulator-name = "pm8550vs_0_l1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_0_l3: ldo3 {
> + regulator-name = "pm8550vs_0_l3";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + pm8550vs_1_l1: ldo1 {
> + regulator-name = "pm8550vs_1_l1";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L3 exists in cmd-db, but the board seems to crash on access */
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + pm8550vs_2_s4: smps4 {
> + regulator-name = "pm8550vs_2_s4";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <984000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_2_s5: smps5 {
> + regulator-name = "pm8550vs_2_s5";
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1120000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_2_l1: ldo1 {
> + regulator-name = "pm8550vs_2_l1";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_2_l2: ldo2 {
> + regulator-name = "pm8550vs_2_l2";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <968000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_2_l3: ldo3 {
> + regulator-name = "pm8550vs_2_l3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + pm8550ve_s4: smps4 {
> + regulator-name = "pm8550ve_s4";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <700000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550ve_l1: ldo1 {
> + regulator-name = "pm8550ve_l1";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550ve_l2: ldo2 {
> + regulator-name = "pm8550ve_l2";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550ve_l3: ldo3 {
> + regulator-name = "pm8550ve_l3";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-5 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "g";
> +
> + pm8550vs_3_s1: smps1 {
> + regulator-name = "pm8550vs_3_s1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_s2: smps2 {
> + regulator-name = "pm8550vs_3_s2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1036000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_s3: smps3 {
> + regulator-name = "pm8550vs_3_s3";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_s4: smps4 {
> + regulator-name = "pm8550vs_3_s4";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1352000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_s5: smps5 {
> + regulator-name = "pm8550vs_3_s5";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_s6: smps6 {
> + regulator-name = "pm8550vs_3_s6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_l1: ldo1 {
> + regulator-name = "pm8550vs_3_l1";
> + regulator-min-microvolt = <1144000>;
> + regulator-max-microvolt = <1256000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_l2: ldo2 {
> + regulator-name = "pm8550vs_3_l2";
> + regulator-min-microvolt = <1104000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8550vs_3_l3: ldo3 {
> + regulator-name = "pm8550vs_3_l3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> +&gpi_dma2 {
> + status = "okay";
> +};
> +
> +&i2c_hub_2 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + pmic@75 {
> + compatible = "dlg,slg51000";
> + reg = <0x75>;
> + dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-0 = <&cam_pwr_a_cs>;
> + pinctrl-names = "default";
> +
> + regulators {
> + slg51000_a_ldo1: ldo1 {
> + regulator-name = "slg51000_a_ldo1";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + slg51000_a_ldo2: ldo2 {
> + regulator-name = "slg51000_a_ldo2";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + slg51000_a_ldo3: ldo3 {
> + regulator-name = "slg51000_a_ldo3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3750000>;
> + };
> +
> + slg51000_a_ldo4: ldo4 {
> + regulator-name = "slg51000_a_ldo4";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3750000>;
> + };
> +
> + slg51000_a_ldo5: ldo5 {
> + regulator-name = "slg51000_a_ldo5";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + slg51000_a_ldo6: ldo6 {
> + regulator-name = "slg51000_a_ldo6";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + slg51000_a_ldo7: ldo7 {
> + regulator-name = "slg51000_a_ldo7";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3750000>;
> + };
> + };
> + };
> +};
> +
> +&i2c_master_hub_0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <1000000>;
> + status = "okay";
> +
> + /* NXP NFC @ 28 */
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + /* LX Semi SW82907 touchscreen @ 28 */
> +};
> +
> +&i2c10 {
> + clock-frequency = <1000000>;
> + status = "okay";
> +
> + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
> +};
> +
> +&i2c11 {
> + clock-frequency = <1000000>;
> + status = "okay";
> +
> + cs35l41_l: speaker-amp@30 {
> + compatible = "cirrus,cs35l45";
> + reg = <0x30>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
> + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
> CS35L45_ASP_TX_HIZ_DISABLED)>;
> + #sound-dai-cells = <1>;
> +
> + cirrus,gpio-ctrl2 {
> + gpio-ctrl = <0x2>;
> + };
> + };
> +
> + cs35l41_r: speaker-amp@31 {
> + compatible = "cirrus,cs35l45";
> + reg = <0x31>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
> + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
> CS35L45_ASP_TX_HIZ_DISABLED)>;
> + #sound-dai-cells = <1>;
> +
> + cirrus,gpio-ctrl2 {
> + gpio-ctrl = <0x2>;
> + };
> + };
> +};
> +
> +&pcie0 {
> + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&pcie0_default_state>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +};
> +
> +&pcie0_phy {
> + vdda-phy-supply = <&pm8550vs_2_l1>;
> + vdda-pll-supply = <&pm8550vs_2_l3>;
> +
> + status = "okay";
> +};
> +
> +&pm8550_flash {
> + status = "okay";
> +
> + led-0 {
> + function = LED_FUNCTION_FLASH;
> + color = <LED_COLOR_ID_WHITE>;
> + led-sources = <1>, <4>;
> + led-max-microamp = <500000>;
> + flash-max-microamp = <1000000>;
> + flash-max-timeout-us = <1280000>;
> + function-enumerator = <0>;
> + };
> +
> + led-1 {
> + function = LED_FUNCTION_FLASH;
> + color = <LED_COLOR_ID_YELLOW>;
> + led-sources = <2>, <3>;
> + led-max-microamp = <500000>;
> + flash-max-microamp = <1000000>;
> + flash-max-timeout-us = <1280000>;
> + function-enumerator = <1>;
> + };
> +};
> +
> +&pm8550_gpios {
> + vol_down_n: volume-down-n-state {
> + pins = "gpio6";
> + function = "normal";
> + power-source = <1>;
> + bias-pull-up;
> + input-enable;
> + };
> +
> + sdc2_card_det_n: sd-card-det-n-state {
> + pins = "gpio12";
> + function = "normal";
> + power-source = <1>;
> + bias-pull-down;
> + output-disable;
> + input-enable;
> + };
> +};
> +
> +&pm8550b_gpios {
> + snapshot_n: snapshot-n-state {
> + pins = "gpio7";
> + function = "normal";
> + power-source = <1>;
> + bias-pull-up;
> + input-enable;
> + };
> +
> + focus_n: focus-n-state {
> + pins = "gpio8";
> + function = "normal";
> + power-source = <1>;
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&pm8550vs_g_gpios {
> + cam_pwr_a_cs: cam-pwr-a-cs-state {
> + pins = "gpio4";
> + function = "normal";
> + power-source = <0x01>;
> + drive-push-pull;
> + output-low;
> + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
> + };
> +};
> +
> +&pm8550b_eusb2_repeater {
> + qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
> + qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
> + qcom,tune-usb2-preem = /bits/ 8 <0x7>;
> + vdd18-supply = <&pm8550_l15>;
> + vdd3-supply = <&pm8550_l5>;
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEUP>;
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
> + "qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
> + "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
> + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
> + pinctrl-names = "default", "sleep";
> + vmmc-supply = <&pm8550_l9>;
> + vqmmc-supply = <&pm8550_l8>;
> + no-sdio;
> + no-mmc;
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <32 8>;
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "otg";
> + usb-role-switch;
> +};
> +
> +&usb_1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_dwc3_ss {
> + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
> +};
> +
> +&usb_1_hsphy {
> + vdd-supply = <&pm8550vs_2_l1>;
> + vdda12-supply = <&pm8550vs_2_l3>;
> + phys = <&pm8550b_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> + vdda-phy-supply = <&pm8550vs_2_l3>;
> + vdda-pll-supply = <&pm8550ve_l3>;
> + orientation-switch;
> +
> + status = "okay";
> +};
> +
> +&usb_dp_qmpphy_out {
> + remote-endpoint = <&pmic_glink_ss_in>;
> +};
> +
> +&usb_dp_qmpphy_usb_ss_in {
> + remote-endpoint = <&usb_1_dwc3_ss>;
> +};
> +
> +&xo_board {
> + clock-frequency = <76800000>;
> +};

--
Best regards,
David Wronek <david@mainlining.org>

\
 
 \ /
  Last update: 2024-04-17 11:04    [W:0.129 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site