Messages in this thread Patch in this message | | | From | Pawel Dembicki <> | Subject | [PATCH net-next v2 3/5] net: dsa: vsc73xx: use macros for rgmii recognition | Date | Wed, 17 Apr 2024 22:50:46 +0200 |
| |
It's preparation for future use. At this moment, the RGMII port is used only for a connection to the MAC interface, but in the future, someone could connect a PHY to it. Using the "phy_interface_mode_is_rgmii" macro allows for the proper recognition of all RGMII modes.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- v2: - resend only
drivers/net/dsa/vitesse-vsc73xx-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 3f8edac9aa5c..09e80aac43e7 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -810,7 +810,7 @@ static void vsc73xx_mac_link_up(struct phylink_config *config, else val = VSC73XX_MAC_CFG_TX_IPG_100_10M; - if (interface == PHY_INTERFACE_MODE_RGMII) + if (phy_interface_mode_is_rgmii(interface)) val |= VSC73XX_MAC_CFG_CLK_SEL_1000M; else val |= VSC73XX_MAC_CFG_CLK_SEL_EXT; -- 2.34.1
| |