lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v4 2/2] drm/panel: Add driver for EDO RM69380 OLED panel
Add support for the 2560x1600@90Hz OLED panel by EDO bundled with a
Raydium RM69380 controller, as found on the Lenovo Xiaoxin Pad Pro 2021.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: David Wronek <david@mainlining.org>
---
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-raydium-rm69380.c | 344 ++++++++++++++++++++++++++
3 files changed, 357 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 154f5bf82980..e2a66c21349f 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -542,6 +542,18 @@ config DRM_PANEL_RAYDIUM_RM692E5
Say Y here if you want to enable support for Raydium RM692E5-based
display panels, such as the one found in the Fairphone 5 smartphone.

+config DRM_PANEL_RAYDIUM_RM69380
+ tristate "Raydium RM69380-based DSI panel"
+ depends on OF && GPIOLIB
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Raydium RM69380-based
+ display panels.
+
+ This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
+ in combination with an EDO OLED panel.
+
config DRM_PANEL_RONBO_RB070D30
tristate "Ronbo Electronics RB070D30 panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 24a02655d726..e2a2807d4ef0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o
+obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o
obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm69380.c b/drivers/gpu/drm/panel/panel-raydium-rm69380.c
new file mode 100644
index 000000000000..4dca6802faef
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-raydium-rm69380.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree.
+ * Copyright (c) 2024 David Wronek <david@mainlining.org>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+struct rm69380_panel {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi[2];
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpio;
+};
+
+static inline
+struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct rm69380_panel, panel);
+}
+
+static void rm69380_reset(struct rm69380_panel *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(15000, 16000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ msleep(30);
+}
+
+static int rm69380_on(struct rm69380_panel *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi[0];
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+ if (ctx->dsi[1])
+ ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4);
+ mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0);
+ mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26);
+ mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f);
+ mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28);
+ mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08);
+
+ ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set tear on: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display on: %d\n", ret);
+ return ret;
+ }
+ msleep(36);
+
+ return 0;
+}
+
+static int rm69380_off(struct rm69380_panel *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi[0];
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ if (ctx->dsi[1])
+ ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display off: %d\n", ret);
+ return ret;
+ }
+ msleep(35);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ return 0;
+}
+
+static int rm69380_prepare(struct drm_panel *panel)
+{
+ struct rm69380_panel *ctx = to_rm69380_panel(panel);
+ struct device *dev = &ctx->dsi[0]->dev;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ rm69380_reset(ctx);
+
+ ret = rm69380_on(ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize panel: %d\n", ret);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rm69380_unprepare(struct drm_panel *panel)
+{
+ struct rm69380_panel *ctx = to_rm69380_panel(panel);
+ struct device *dev = &ctx->dsi[0]->dev;
+ int ret;
+
+ ret = rm69380_off(ctx);
+ if (ret < 0)
+ dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+ return 0;
+}
+
+static const struct drm_display_mode rm69380_mode = {
+ .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000,
+ .hdisplay = 2560,
+ .hsync_start = 2560 + 32,
+ .hsync_end = 2560 + 32 + 12,
+ .htotal = 2560 + 32 + 12 + 38,
+ .vdisplay = 1600,
+ .vsync_start = 1600 + 20,
+ .vsync_end = 1600 + 20 + 4,
+ .vtotal = 1600 + 20 + 4 + 8,
+ .width_mm = 248,
+ .height_mm = 155,
+ .type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int rm69380_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode);
+}
+
+static const struct drm_panel_funcs rm69380_panel_funcs = {
+ .prepare = rm69380_prepare,
+ .unprepare = rm69380_unprepare,
+ .get_modes = rm69380_get_modes,
+};
+
+static int rm69380_bl_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ u16 brightness = backlight_get_brightness(bl);
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+ if (ret < 0)
+ return ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return 0;
+}
+
+static int rm69380_bl_get_brightness(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ u16 brightness;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
+ if (ret < 0)
+ return ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return brightness;
+}
+
+static const struct backlight_ops rm69380_bl_ops = {
+ .update_status = rm69380_bl_update_status,
+ .get_brightness = rm69380_bl_get_brightness,
+};
+
+static struct backlight_device *
+rm69380_create_backlight(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 511,
+ .max_brightness = 2047,
+ };
+
+ return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+ &rm69380_bl_ops, &props);
+}
+
+static int rm69380_probe(struct mipi_dsi_device *dsi)
+{
+ struct mipi_dsi_host *dsi_sec_host;
+ struct rm69380_panel *ctx;
+ struct device *dev = &dsi->dev;
+ struct device_node *dsi_sec;
+ int ret, i;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->supplies[0].supply = "vddio";
+ ctx->supplies[1].supply = "avdd";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+
+ if (dsi_sec) {
+ const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0,
+ dsi_sec };
+
+ dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec);
+ of_node_put(dsi_sec);
+ if (!dsi_sec_host)
+ return dev_err_probe(dev, -EPROBE_DEFER,
+ "Cannot get secondary DSI host\n");
+
+ ctx->dsi[1] =
+ devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info);
+ if (IS_ERR(ctx->dsi[1]))
+ return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]),
+ "Cannot get secondary DSI node\n");
+
+ mipi_dsi_set_drvdata(ctx->dsi[1], ctx);
+ }
+
+ ctx->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ ctx->panel.prepare_prev_first = true;
+
+ ctx->panel.backlight = rm69380_create_backlight(dsi);
+ if (IS_ERR(ctx->panel.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+ "Failed to create backlight\n");
+
+ drm_panel_add(&ctx->panel);
+
+ for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) {
+ if (!ctx->dsi[i])
+ continue;
+
+ dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i);
+
+ ctx->dsi[i]->lanes = 4;
+ ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888;
+ ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return dev_err_probe(dev, ret,
+ "Failed to attach to DSI%d\n", i);
+ }
+ }
+
+ return 0;
+}
+
+static void rm69380_remove(struct mipi_dsi_device *dsi)
+{
+ struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi);
+
+ drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id rm69380_of_match[] = {
+ { .compatible = "lenovo,j716f-edo-rm69380" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rm69380_of_match);
+
+static struct mipi_dsi_driver rm69380_panel_driver = {
+ .probe = rm69380_probe,
+ .remove = rm69380_remove,
+ .driver = {
+ .name = "panel-raydium-rm69380",
+ .of_match_table = rm69380_of_match,
+ },
+};
+module_mipi_dsi_driver(rm69380_panel_driver);
+
+MODULE_AUTHOR("David Wronek <david@mainlining.org");
+MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels");
+MODULE_LICENSE("GPL");
--
2.44.0


\
 
 \ /
  Last update: 2024-04-17 18:30    [W:0.072 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site