lkml.org 
[lkml]   [2024]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] hwmon: pmbus: adm1275: add adm1281 support
On Wed, Apr 17, 2024 at 08:07:22AM +0800, Jose Ramon San Buenaventura wrote:
> Adding support for adm1281 which is similar to adm1275
>
> ADM1281 has STATUS_CML read support which is also being added.
>
> Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
> ---
> Documentation/hwmon/adm1275.rst | 14 +++++++++++---
> drivers/hwmon/pmbus/Kconfig | 4 ++--
> drivers/hwmon/pmbus/adm1275.c | 27 +++++++++++++++++++++++++--
> 3 files changed, 38 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
> index 804590eea..467daf8ce 100644
> --- a/Documentation/hwmon/adm1275.rst
> +++ b/Documentation/hwmon/adm1275.rst
> @@ -43,6 +43,14 @@ Supported chips:
>
> Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
>
> + * Analog Devices ADM1281
> +
> + Prefix: 'adm1281'
> +
> + Addresses scanned: -
> +
> + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adm1281.pdf
> +
> * Analog Devices ADM1293/ADM1294
>
> Prefix: 'adm1293', 'adm1294'
> @@ -58,10 +66,10 @@ Description
> -----------
>
> This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272,
> -ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
> +ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 Hot-Swap Controller and
> Digital Power Monitors.
>
> -ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
> +ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 are hot-swap
> controllers that allow a circuit board to be removed from or inserted into
> a live backplane. They also feature current and voltage readback via an
> integrated 12 bit analog-to-digital converter (ADC), accessed using a
> @@ -144,5 +152,5 @@ temp1_highest Highest observed temperature.
> temp1_reset_history Write any value to reset history.
>
> Temperature attributes are supported on ADM1272 and
> - ADM1278.
> + ADM1278, and ADM1281.
> ======================= =======================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 557ae0c41..9c1d0d7d5 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -51,8 +51,8 @@ config SENSORS_ADM1275
> tristate "Analog Devices ADM1275 and compatibles"
> help
> If you say yes here you get hardware monitoring support for Analog
> - Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
> - and ADM1294 Hot-Swap Controller and Digital Power Monitors.
> + Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1281,
> + ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
>
> This driver can also be built as a module. If so, the module will
> be called adm1275.
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index e2c61d6fa..6c3e8840f 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -18,7 +18,7 @@
> #include <linux/log2.h>
> #include "pmbus.h"
>
> -enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
> +enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1281, adm1293, adm1294 };
>
> #define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
> #define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
> @@ -101,6 +101,7 @@ struct adm1275_data {
> bool have_pin_max;
> bool have_temp_max;
> bool have_power_sampling;
> + bool have_status_cml;
> struct pmbus_driver_info info;
> };
>
> @@ -469,6 +470,22 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
> ret |= PB_VOLTAGE_UV_WARNING;
> }
> break;
> + case PMBUS_STATUS_CML:
> + if (!data->have_status_cml)
> + return -ENXIO;
> +
> + ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
> + if (ret < 0)
> + break;

You'll have to explain why this additional status byte read
is necessary (while it isn't necessary for all other chips supporting
PMBUS_STATUS_CML).

Thanks,
Guenter

\
 
 \ /
  Last update: 2024-04-17 02:33    [W:0.048 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site