lkml.org 
[lkml]   [2024]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 6/6] mmc: sdhci-brcmstb: Add BCM2712 SD Express support
    From


    On 4/13/2024 3:14 PM, Andrea della Porta wrote:
    > Broadcom BCM2712 SDHCI controller is SD Express capable. Add support
    > for sde capability where the implementation is based on downstream driver,
    > diverging from it in the way that init_sd_express callback is invoked:
    > in downstream the sdhci_ops structure has been augmented with a new
    > function ptr 'init_sd_express' that just propagate the call to the
    > driver specific callback so that the callstack from a structure
    > standpoint is mmc_host_ops -> sdhci_ops. The drawback here is in the
    > added level of indirection (the newly added init_sd_express is
    > redundant) and the sdhci_ops structure declaration has to be changed.
    > To overcome this the presented approach consist in patching the mmc_host_ops
    > init_sd_express callback to point directly to the custom function defined in
    > this driver (see struct brcmstb_match_priv).
    >
    > Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
    > ---
    > drivers/mmc/host/Kconfig | 1 +
    > drivers/mmc/host/sdhci-brcmstb.c | 147 ++++++++++++++++++++++++++++++-
    > 2 files changed, 147 insertions(+), 1 deletion(-)
    >
    > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
    > index aebc587f77a7..343ccac1a4e4 100644
    > --- a/drivers/mmc/host/Kconfig
    > +++ b/drivers/mmc/host/Kconfig
    > @@ -1018,6 +1018,7 @@ config MMC_SDHCI_BRCMSTB
    > depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
    > depends on MMC_SDHCI_PLTFM
    > select MMC_CQHCI
    > + select OF_DYNAMIC
    > default ARCH_BRCMSTB || BMIPS_GENERIC
    > help
    > This selects support for the SDIO/SD/MMC Host Controller on
    > diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
    > index 907a4947abe5..56fb34a75ec2 100644
    > --- a/drivers/mmc/host/sdhci-brcmstb.c
    > +++ b/drivers/mmc/host/sdhci-brcmstb.c
    > @@ -29,6 +29,7 @@
    >
    > #define BRCMSTB_PRIV_FLAGS_HAS_CQE BIT(0)
    > #define BRCMSTB_PRIV_FLAGS_GATE_CLOCK BIT(1)
    > +#define BRCMSTB_PRIV_FLAGS_HAS_SD_EXPRESS BIT(2)
    >
    > #define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
    >
    > @@ -50,13 +51,19 @@ struct sdhci_brcmstb_priv {
    > unsigned int flags;
    > struct clk *base_clk;
    > u32 base_freq_hz;
    > + struct regulator *sde_1v8;
    > + struct device_node *sde_pcie;
    > + void *__iomem sde_ioaddr;
    > + void *__iomem sde_ioaddr2;
    > struct pinctrl *pinctrl;
    > struct pinctrl_state *pins_default;
    > + struct pinctrl_state *pins_sdex;
    > };
    >
    > struct brcmstb_match_priv {
    > void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios);
    > void (*cfginit)(struct sdhci_host *host);
    > + int (*init_sd_express)(struct mmc_host *mmc, struct mmc_ios *ios);
    > struct sdhci_ops *ops;
    > const unsigned int flags;
    > };
    > @@ -263,6 +270,105 @@ static void sdhci_brcmstb_cfginit_2712(struct sdhci_host *host)
    > }
    > }
    >
    > +static int bcm2712_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
    > +{
    > + struct sdhci_host *host = mmc_priv(mmc);
    > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
    > + struct sdhci_brcmstb_priv *brcmstb_priv = sdhci_pltfm_priv(pltfm_host);
    > + struct device *dev = host->mmc->parent;
    > + u32 ctrl_val;
    > + u32 present_state;
    > + int ret;
    > +
    > + if (!brcmstb_priv->sde_ioaddr || !brcmstb_priv->sde_ioaddr2)
    > + return -EINVAL;
    > +
    > + if (!brcmstb_priv->pinctrl)
    > + return -EINVAL;
    > +
    > + /* Turn off the SD clock first */
    > + sdhci_set_clock(host, 0);
    > +
    > + /* Disable SD DAT0-3 pulls */
    > + pinctrl_select_state(brcmstb_priv->pinctrl, brcmstb_priv->pins_sdex);
    > +
    > + ctrl_val = readl(brcmstb_priv->sde_ioaddr);
    > + dev_dbg(dev, "ctrl_val 1 %08x\n", ctrl_val);
    > +
    > + /* Tri-state the SD pins */
    > + ctrl_val |= 0x1ff8;

    No magic values please.

    > + writel(ctrl_val, brcmstb_priv->sde_ioaddr);
    > + dev_dbg(dev, "ctrl_val 1->%08x (%08x)\n", ctrl_val, readl(brcmstb_priv->sde_ioaddr));
    > + /* Let voltages settle */
    > + udelay(100);

    Why not usleep_range()?

    > +
    > + /* Enable the PCIe sideband pins */
    > + ctrl_val &= ~0x6000;

    No magic values please.

    > + writel(ctrl_val, brcmstb_priv->sde_ioaddr);
    > + dev_dbg(dev, "ctrl_val 1->%08x (%08x)\n", ctrl_val, readl(brcmstb_priv->sde_ioaddr));
    > + /* Let voltages settle */
    > + udelay(100);

    Likewise.

    > +
    > + /* Turn on the 1v8 VDD2 regulator */
    > + ret = regulator_enable(brcmstb_priv->sde_1v8);
    > + if (ret)
    > + return ret;
    > +
    > + /* Wait for Tpvcrl */
    > + msleep(1);
    > +
    > + /* Sample DAT2 (CLKREQ#) - if low, card is in PCIe mode */
    > + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
    > + present_state = (present_state & SDHCI_DATA_LVL_MASK) >> SDHCI_DATA_LVL_SHIFT;
    > + dev_dbg(dev, "state = 0x%08x\n", present_state);
    > +
    > + if (present_state & BIT(2)) {

    Likewise, replace with constant.

    > + dev_err(dev, "DAT2 still high, abandoning SDex switch\n");
    > + return -ENODEV;
    > + }
    > +
    > + /* Turn on the LCPLL PTEST mux */
    > + ctrl_val = readl(brcmstb_priv->sde_ioaddr2 + 20); // misc5
    > + ctrl_val &= ~(0x7 << 7);
    > + ctrl_val |= 3 << 7;
    > + writel(ctrl_val, brcmstb_priv->sde_ioaddr2 + 20);
    > + dev_dbg(dev, "misc 5->%08x (%08x)\n", ctrl_val, readl(brcmstb_priv->sde_ioaddr2 + 20));
    > +
    > + /* PTEST diff driver enable */
    > + ctrl_val = readl(brcmstb_priv->sde_ioaddr2);
    > + ctrl_val |= BIT(21);
    > + writel(ctrl_val, brcmstb_priv->sde_ioaddr2);
    > +
    > + dev_dbg(dev, "misc 0->%08x (%08x)\n", ctrl_val, readl(brcmstb_priv->sde_ioaddr2));
    > +
    > + /* Wait for more than the minimum Tpvpgl time */
    > + msleep(100);
    > +
    > + if (brcmstb_priv->sde_pcie) {
    > + struct of_changeset changeset;
    > + static struct property okay_property = {
    > + .name = "status",
    > + .value = "okay",
    > + .length = 5,
    > + };
    > +
    > + /* Enable the pcie controller */
    > + of_changeset_init(&changeset);
    > + ret = of_changeset_update_property(&changeset,
    > + brcmstb_priv->sde_pcie,
    > + &okay_property);
    > + if (ret) {
    > + dev_err(dev, "%s: failed to update property - %d\n", __func__,
    > + ret);
    > + return -ENODEV;
    > + }
    > + ret = of_changeset_apply(&changeset);
    > + }

    Why are you doing this? Cannot the firmware enable/disable the node
    according to the boot mode or something else?

    This is not going to fly for upstream, sorry.
    --
    Florian
    [unhandled content-type:application/pkcs7-signature]
    \
     
     \ /
      Last update: 2024-05-27 16:40    [W:3.028 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site