lkml.org 
[lkml]   [2024]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 1/2] dt-bindings: usb: typec: anx7688: start a binding document
On Thu, Apr 11, 2024 at 09:59:35PM +0200, Krzysztof Kozlowski wrote:
> On 10/04/2024 04:20, Ondřej Jirman wrote:
> > On Mon, Apr 08, 2024 at 10:12:30PM GMT, Krzysztof Kozlowski wrote:
> >> On 08/04/2024 17:17, Ondřej Jirman wrote:
> >>>
> >>> Now for things to not fail during suspend/resume based on PM callbacks
> >>> invocation order, anx7688 driver needs to enable this regulator too, as long
> >>> as it needs it.
> >>
> >> No, the I2C bus driver needs to manage it. Not one individual I2C
> >> device. Again, why anx7688 is specific? If you next phone has anx8867,
> >> using different driver, you also add there i2c-supply? And if it is
> >> nxp,ptn5100 as well?
> >
> > Yes, that could work, if I2C core would manage this.
>
> Either I don't understand about which I2C regulator you speak or this is
> not I2C core regulator. This is a regulator to be managed by the I2C
> controller, not by I2C core.

If it is a supply that pulls up the SDA/SCL lines, then it is generic
enough to be handled by the core. For example, on Qualcomm platforms CCI
lines also usually have external supply as a pull-up.


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2024-05-27 16:36    [W:2.623 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site