lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 0/3] serial: 8250_pnp: Support configurable reg shift property
From

在 2024/4/9 20:53, Andy Shevchenko 写道:
> On Tue, Apr 09, 2024 at 03:43:20PM +0800, Guanbing Huang wrote:
>> From: Guanbing Huang <albanhuang@tencent.com>
>>
>> The 16550a serial port based on the ACPI table requires obtaining the
>> reg-shift attribute. In the ACPI scenario, If the reg-shift property
>> is not configured like in DTS, the 16550a serial driver cannot read or
>> write controller registers properly during initialization.
>>
>> To address the issue of configuring the reg-shift property, the
>> __uart_read_properties() universal interface is called to implement it.
>> Adaptation of PNP devices is done in the __uart_read_properties() function.
> You either forgot or deliberately not added my tag. Can you elaborate?

I'm very sorry, this is my first time submitting a kernel patch. My
understanding

of the submission specification is not comprehensive and profound enough,

and I didn't intentionally not add tags. I hope you can forgive my
operational mistake.

Should I just add a "Reviewed-by tag", or do I need any other tags? Thanks.


With Best Regards.

>

\
 
 \ /
  Last update: 2024-05-27 16:32    [W:0.045 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site