lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC PATCH 0/2] Disable RT-throttling for idle-inject threads
    On Wed, Apr 10, 2024 at 10:24:15AM +0530, Atul Pant wrote:
    > We are trying to implement a solution for thermal mitigation by using
    > idle injection on CPUs. However we face some limitations with the
    > current idle-inject framework. As per our need, we want to start
    > injecting idle cycles on a cpu for indefinite time (until the
    > temperature/power of the CPU falls below a threshold). This will allow
    > to keep the hot CPUs in the sleep state until we see improvement in
    > temperature/power. If we set idle duration to a large value or have an
    > idle-injection ratio of 100%, then the idle-inject RT thread suffers
    > from RT throttling. This results in the CPU exiting from the sleep state
    > and consume some power.
    >
    > To solve this limitation, we propose a solution to disable RT-throttling
    > whenever idle-inject threads run. We achieve this by not accounting the
    > runtime for the idle-inject threads.

    Running RT tasks for indefinite amounts of time will wreck the system.
    Things like workqueues and other per-cpu threads expect service or
    things will pile up and run to ground.

    Idle injection, just like every other RT user must not be able to starve
    the system of service.

    If your system design requires this (I would argue it is broken), look
    at other means, like CPU-hotplug (which I also really detest) -- which
    takes down the CPU in a controlled manner and avoids the resource
    issues.

    \
     
     \ /
      Last update: 2024-05-27 16:32    [W:3.088 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site