lkml.org 
[lkml]   [2024]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses
Date
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses. Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:

cn9130-crb.dtsi:29.35-37.4: Warning (unit_address_vs_reg): /ap0_mmc_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:39.38-46.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:57.33-65.4: Warning (unit_address_vs_reg): /cp0_sd_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:67.31-75.4: Warning (unit_address_vs_reg): /cp0_sd_vcc@0: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 6fcc34f7b464..d48dd6bca6e5 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
};

- ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+ ap0_reg_mmc_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_mmc_vccq";
regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@ ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
3300000 0x0>;
};

- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
};

- cp0_usb3_0_phy0: cp0_usb3_phy0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
};

- cp0_usb3_0_phy1: cp0_usb3_phy1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};

- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-3 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
3300000 0x0>;
};

- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
--
2.34.1

\
 
 \ /
  Last update: 2024-05-27 16:18    [W:0.056 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site