lkml.org 
[lkml]   [2024]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
Date
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.

Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
- Updated commit description
- Dropped usage of IS_ENABLED() and used defined() instead
---
drivers/clocksource/renesas-ostm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 8da972dc1713..39487d05a009 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -224,7 +224,7 @@ static int __init ostm_init(struct device_node *np)

TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);

-#ifdef CONFIG_ARCH_RZG2L
+#if defined(CONFIG_ARCH_RZG2L) || defined(CONFIG_ARCH_R9A09G057)
static int __init ostm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
--
2.34.1

\
 
 \ /
  Last update: 2024-03-22 16:14    [W:0.055 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site