Messages in this thread Patch in this message | | | From | Sam Protsenko <> | Subject | [PATCH v2 2/2] spi: s3c64xx: Add Exynos850 support | Date | Wed, 24 Jan 2024 19:35:43 -0600 |
| |
Add SPI port configuration for Exynos850 SoC. It has 3 USI blocks which can be configured in SPI mode:
* spi_0: BLK_PERI_SPI_0 (0x13940000) * spi_1: BLK_ALIVE_USI_CMGP00 (0x11d00000) * spi_2: BLK_ALIVE_USI_CMGP01 (0x11d20000)
SPI FIFO depth is 64 bytes for all those SPI blocks, so the fifo_lvl_mask value is set to 0x7f. All blocks have DIV_4 as the default internal clock divider, and an internal loopback mode to run a loopback test.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- Changes in v2: - Collected R-b tags
drivers/spi/spi-s3c64xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 432ec60d3568..7f7eb8f742e4 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1460,6 +1460,17 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config exynos850_spi_port_config = { + .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f }, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f}, @@ -1514,6 +1525,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { { .compatible = "samsung,exynos5433-spi", .data = (void *)&exynos5433_spi_port_config, }, + { .compatible = "samsung,exynos850-spi", + .data = (void *)&exynos850_spi_port_config, + }, { .compatible = "samsung,exynosautov9-spi", .data = (void *)&exynosautov9_spi_port_config, }, -- 2.39.2
| |