lkml.org 
[lkml]   [2023]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 7/9] regulator: mt6358: Add output voltage fine tuning to fixed regulators
    From
    Il 09/06/23 10:30, Chen-Yu Tsai ha scritto:
    > The "fixed" LDO regulators found on the MT6358 and MT6366 PMICs have
    > either no voltage selection register, or only one valid setting.
    > However these do have a fine voltage calibration setting that can
    > slightly boost the output voltage from 0 mV to 100 mV, in 10 mV
    > increments.
    >
    > Add support for this by changing these into linear range regulators.
    >
    > Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>

    Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

    \
     
     \ /
      Last update: 2023-06-09 12:14    [W:4.202 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site