lkml.org 
[lkml]   [2023]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [v6 1/4] dt-bindings: pwm: Add ASPEED PWM Control documentation
From
On 08/06/2023 10:21, Billy Tsai wrote:
> On 08/06/2023 09:47, Billy Tsai wrote:
> >>
> >> >> +
> >> >> +allOf:
> >> >> + - $ref: pwm.yaml#
> >> >> +
> >> >> +properties:
> >> >> + compatible:
> >> >> + enum:
> >> >> + - aspeed,ast2600-pwm
> >> >> +
> >> >> + "#pwm-cells":
> >> >> + const: 3
> >>
> >> > 3 cells? For one PWM? What are they?
> >>
> >> channel, period and polarity.
>
> > Don't cut my responses. You wrote you have one PWM output, so only one
> > channel. What do you put then in the channel?
>
> You need to put 0 in the cell of the channel, the example of the dts usage will like following:
>
> pwm0: pwm0@1e610000 {
> compatible = "aspeed,ast2600-pwm";
> reg = <0x1e610000 0x8>;
> #pwm-cells = <3>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pwm0_default>;
> clocks = <&syscon ASPEED_CLK_AHB>;
> resets = <&syscon ASPEED_RESET_PWM>;
> status = "okay";
> };
>
> pwm1: pwm1@1e610010 {
> compatible = "aspeed,ast2600-pwm";
> reg = <0x1e610010 0x8>;
> #pwm-cells = <3>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pwm1_default>;
> clocks = <&syscon ASPEED_CLK_AHB>;
> resets = <&syscon ASPEED_RESET_PWM>;
> status = "okay";

BTW, these are not two PWM devices but one. I don't understand why you
changed previous design into something like this, but this is not
representing your hardware.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-06-08 10:40    [W:0.078 / U:3.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site