lkml.org 
[lkml]   [2023]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] MIPS: DTS: qi_lb60: Don't use unit address for regulators
Date
The regulators don't have any "reg" property, and therefore shouldn't
use an unit address in their node names.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
arch/mips/boot/dts/ingenic/qi_lb60.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index ba0218971572..24f987244a12 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -27,7 +27,7 @@ chosen {
stdout-path = &uart0;
};

- vcc: regulator@0 {
+ vcc: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "vcc";

@@ -36,7 +36,7 @@ vcc: regulator@0 {
regulator-always-on;
};

- mmc_power: regulator@1 {
+ mmc_power: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "mmc_vcc";
gpio = <&gpd 2 0>;
@@ -45,7 +45,7 @@ mmc_power: regulator@1 {
regulator-max-microvolt = <3300000>;
};

- amp_supply: regulator@2 {
+ amp_supply: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "amp_supply";
gpio = <&gpd 4 0>;
--
2.39.2
\
 
 \ /
  Last update: 2023-06-04 14:28    [W:0.091 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site