lkml.org 
[lkml]   [2023]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
On Fri, 2 Jun 2023 at 13:00, Amit Pundir <amit.pundir@linaro.org> wrote:
>
> On Thu, 1 Jun 2023 at 19:35, Doug Anderson <dianders@chromium.org> wrote:
> >
> > If you reorder the nodes in the device tree, I think it'll change the
> > probe order. Does that affect anything? I'm wondering if there's some
> > sort of delayed reaction from a previous regulator.
>
> Hi, Bumping lvs1 and lvs2 regulators up to the top of the list in the
> DTS https://bugs.linaro.org/show_bug.cgi?id=5975#c4 does seem to work.
> I can't reproduce the crash in 125 reboots so far, while I'm still
> testing with only qcom-rpmh-regulator kernel module. I'll do some more
> testing with full system running and send this re-ordering fix I can't
> reproduce the crash further.

Hi, successfully rebooted AOSP with v6.4-rc4 on DB845c about 100+
times with this above mentioned lvs nodes reordering in the device
tree. I don't see any obvious functionality breakage in my limited
smoke testing so far either. I'll post this workaround/fix for review
on the lkml.

Regards,
Amit Pundir

\
 
 \ /
  Last update: 2023-06-02 15:07    [W:0.192 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site