lkml.org 
[lkml]   [2023]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm64: dts: mt8173: Update thermal node
Date
From: Matthias Brugger <matthias.bgg@gmail.com>

Following the binding description, update to use
thermal-sensor-cells = 1
While at it also fix the node name of the CPU critical trip point.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

---

Changes in v2:
- fix node name of CPU critical trip point

arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900f28..d760776e3daf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -270,7 +270,7 @@ cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */

- thermal-sensors = <&thermal>;
+ thermal-sensors = <&thermal 0>;
sustainable-power = <1500>; /* milliwatts */

trips {
@@ -286,7 +286,7 @@ target: trip-point1 {
type = "passive";
};

- cpu_crit: cpu_crit0 {
+ cpu_crit: cpu-crit0 {
temperature = <115000>;
hysteresis = <2000>;
type = "critical";
@@ -766,7 +766,7 @@ spi: spi@1100a000 {
};

thermal: thermal@1100b000 {
- #thermal-sensor-cells = <0>;
+ #thermal-sensor-cells = <1>;
compatible = "mediatek,mt8173-thermal";
reg = <0 0x1100b000 0 0x1000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
--
2.40.1
\
 
 \ /
  Last update: 2023-06-01 15:45    [W:0.049 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site