lkml.org 
[lkml]   [2023]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/11] ravb: remove R-Car H3 ES1.* handling
Date
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Please apply individually per subsystem. There are no dependencies and the SoC
doesn't boot anymore since v6.3-rc1.

drivers/net/ethernet/renesas/ravb_main.c | 15 ---------------
1 file changed, 15 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 0f54849a3823..b81f0d8dfda8 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -28,7 +28,6 @@
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/sys_soc.h>
#include <linux/reset.h>
#include <linux/math64.h>

@@ -1390,11 +1389,6 @@ static void ravb_adjust_link(struct net_device *ndev)
phy_print_status(phydev);
}

-static const struct soc_device_attribute r8a7795es10[] = {
- { .soc_id = "r8a7795", .revision = "ES1.0", },
- { /* sentinel */ }
-};
-
/* PHY init function */
static int ravb_phy_init(struct net_device *ndev)
{
@@ -1434,15 +1428,6 @@ static int ravb_phy_init(struct net_device *ndev)
goto err_deregister_fixed_link;
}

- /* This driver only support 10/100Mbit speeds on R-Car H3 ES1.0
- * at this time.
- */
- if (soc_device_match(r8a7795es10)) {
- phy_set_max_speed(phydev, SPEED_100);
-
- netdev_info(ndev, "limited PHY to 100Mbit/s\n");
- }
-
if (!info->half_duplex) {
/* 10BASE, Pause and Asym Pause is not supported */
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
--
2.35.1
\
 
 \ /
  Last update: 2023-03-27 00:47    [W:0.200 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site