lkml.org 
[lkml]   [2023]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 09/11] arm64: dtsi: qcom: ipq5018: enable nodes required for multipd
From

On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
> Enable nodes required for multipd remoteproc bring up
>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 130 ++++++++++++++++++++++++++
> 1 file changed, 130 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 084fb7b30dfd..4fa0990ab543 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -95,6 +95,24 @@ tz: tz@4ac00000 {
> reg = <0x0 0x4ac00000 0x0 0x00400000>;
> no-map;
> };
> +
> + q6_region: wcnss@4b000000 {
> + no-map;
> + reg = <0x0 0x4b000000 0x0 0x01700000>;


move the no-map after reg property to keep it consistent with other
nodes. Also no need to pad the size in reg property


> + };
> +
> + smem@4ab00000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x4ab00000 0x0 0x00100000>;
> + hwlocks = <&tcsr_mutex 0>;
> + no-map;
> + };
> + };
> +
> + firmware {


nodes should be in sorted order, please take care of this throughout the
changes.


> + scm {
> + compatible = "qcom,scm-ipq5018", "qcom,scm";
> + };
> };
>
> timer {
> @@ -105,6 +123,30 @@ timer {
> <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> };
>
> + wcss: wcss-smp2p {
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 9>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + wcss_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + wcss_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -217,5 +259,93 @@ frame@b128000 {
> status = "disabled";
> };
> };
> +
> + tcsr_mutex: hwlock@1905000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x01905000 0x8000>;


Please cover the entire region of size 128KB


> + #hwlock-cells = <1>;
> + };
> +
> + apcs_glb: mailbox@b111000 {
> + compatible = "qcom,ipq5018-apcs-apps-global";
> + reg = <0x0b111000 0x1000>;
> + #clock-cells = <1>;
> + #mbox-cells = <1>;
> + };
> +
> + q6v5_wcss: remoteproc@cd00000 {
> + compatible = "qcom,ipq5018-q6-mpd";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + reg = <0x0cd00000 0x4040>;


reg can be moved after compatible


> + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
> + <&wcss_smp2p_in 0 0>,
> + <&wcss_smp2p_in 1 0>,
> + <&wcss_smp2p_in 2 0>,
> + <&wcss_smp2p_in 3 0>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + qcom,smem-states = <&wcss_smp2p_out 0>,
> + <&wcss_smp2p_out 1>;
> + qcom,smem-state-names = "shutdown",
> + "stop";
> + memory-region = <&q6_region>;
> +
> + glink-edge {
> + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
> + label = "rtr";
> + qcom,remote-pid = <1>;
> + mboxes = <&apcs_glb 8>;
> + };
> +
> + q6_wcss_pd1: remoteproc_pd1 {
> + compatible = "qcom,ipq5018-wcss-ahb-mpd";
> + };
> +
> + q6_wcss_pd2: remoteproc_pd2 {
> + compatible = "qcom,ipq5018-wcss-pcie-mpd";
> + interrupts-extended = <&wcss_smp2p_in 16 0>,
> + <&wcss_smp2p_in 17 0>,


Please take care of the alignment


> + <&wcss_smp2p_in 20 0>,
> + <&wcss_smp2p_in 19 0>;
> + interrupt-names = "fatal",
> + "ready",
> + "spawn-ack",
> + "stop-ack";
> +
> + qcom,smem-states = <&wcss_smp2p_out 16>,
> + <&wcss_smp2p_out 17>,
> + <&wcss_smp2p_out 18>;
> + qcom,smem-state-names = "shutdown",
> + "stop",
> + "spawn";
> + status = "disabled";
> + };
> +
> + q6_wcss_pd3: remoteproc_pd3 {
> + compatible = "qcom,ipq5018-wcss-pcie-mpd";
> + interrupts-extended = <&wcss_smp2p_in 24 0>,
> + <&wcss_smp2p_in 25 0>,
> + <&wcss_smp2p_in 28 0>,
> + <&wcss_smp2p_in 27 0>;
> + interrupt-names = "fatal",
> + "ready",
> + "spawn-ack",
> + "stop-ack";
> +
> + qcom,smem-states = <&wcss_smp2p_out 24>,
> + <&wcss_smp2p_out 25>,
> + <&wcss_smp2p_out 26>;
> + qcom,smem-state-names = "shutdown",
> + "stop",
> + "spawn";
> + status = "disabled";
> + };
> + };
> };
> };

\
 
 \ /
  Last update: 2023-03-27 00:47    [W:0.404 / U:1.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site