lkml.org 
[lkml]   [2023]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] gpu/drm/panel: Add Lenovo NT36523W BOE panel
Hi,

On 17/02/2023 12:29, Konrad Dybcio wrote:
> Introduce support for the BOE panel with a NT36523W touch/driver IC
> found on some Lenovo Tab P11 devices. It's a 2000x1200, 24bit RGB
> MIPI DSI panel with integrated DCS-controlled backlight (that expects
> big-endian communication).
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-lenovo-nt36523w-boe.c | 751 ++++++++++++++++++++++
> 3 files changed, 764 insertions(+)
>

<snip>

> diff --git a/drivers/gpu/drm/panel/panel-lenovo-nt36523w-boe.c b/drivers/gpu/drm/panel/panel-lenovo-nt36523w-boe.c
> new file mode 100644
> index 000000000000..83478e471493
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lenovo-nt36523w-boe.c
> @@ -0,0 +1,751 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 Linaro Limited
> + *
> + * Generated with linux-mdss-dsi-panel-driver-generator with
> + * some manual adjustments.
> + */

<snip>

> +static int nt36523w_boe_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = backlight_get_brightness(bl);
> + int ret;
> +
> + brightness = cpu_to_be16(brightness);
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (ret < 0)
> + return ret;

It's not wrong as is, but could you switch to mipi_dsi_dcs_set_display_brightness_large() ?

> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return 0;
> +}
> +
> +static int nt36523w_boe_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);

And here to mipi_dsi_dcs_get_display_brightness_large() ?
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + brightness = be16_to_cpu(brightness);
> +
> + return brightness;
> +}
> +
Please send a v2 with those changes and keep my reviewed-by

Thanks!
Neil

\
 
 \ /
  Last update: 2023-03-27 00:46    [W:0.099 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site