Messages in this thread Patch in this message | | | Date | Wed, 29 Mar 2023 17:00:21 +0100 | From | Daniel Golle <> | Subject | [RFC PATCH net-next v3 13/15] net: dsa: mt7530: add support for 10G link modes for CPU port |
| |
The built-in switch of the MT7988 SoC is internally connected using a stateless 10G link. Add support for 10G interface modes to silence a warning otherwise occurring when the switch driver is setup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- drivers/net/dsa/mt7530.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index fd55ddc2d1eb3..a4b49e5753bdc 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2616,6 +2616,9 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, case PHY_INTERFACE_MODE_1000BASEX: case PHY_INTERFACE_MODE_2500BASEX: /* handled in SGMII PCS driver */ + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_10GKR: + /* internal stateless 10G link */ return 0; default: return -EINVAL; @@ -2739,7 +2742,9 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, * variants. */ if (interface == PHY_INTERFACE_MODE_TRGMII || - (phy_interface_mode_is_8023z(interface))) { + interface == PHY_INTERFACE_MODE_USXGMII || + interface == PHY_INTERFACE_MODE_10GKR || + phy_interface_mode_is_8023z(interface)) { speed = SPEED_1000; duplex = DUPLEX_FULL; } -- 2.39.2
| |