Messages in this thread | | | Date | Sun, 26 Mar 2023 10:56:04 +0200 | Subject | Re: [PATCH 1/4] dts: arm64: qcom: sdm845: add SLPI remoteproc | From | Krzysztof Kozlowski <> |
| |
On 25/03/2023 14:51, Dylan Van Assche wrote: > Add the SLPI remoteproc to the SDM845 Qualcomm SoC which is responsible > for exposing the sensors connected to the SoC. The SLPI communicates > over GLink edge 'dsps' and is similar to other DSPs e.g. ADSP or CDSP. > This patch allows the SLPI to boot and expose itself over QRTR as > service 400. > > Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 37 ++++++++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 2f32179c7d1b..8dcfe6293762 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3311,6 +3311,43 @@ glink-edge { > }; > }; > > + slpi_pas: remoteproc@5c00000 { > + compatible = "qcom,sdm845-slpi-pas"; > + reg = <0 0x5c00000 0 0x4000>; > + > + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, > + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "xo"; > + > + qcom,qmp = <&aoss_qmp>; > + > + power-domains = <&rpmhpd SDM845_CX>, > + <&rpmhpd SDM845_MX>; > + power-domain-names = "lcx", "lmx"; > + > + memory-region = <&slpi_mem>; > + > + qcom,smem-states = <&slpi_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + status = "disabled"; > + > + glink-edge { > + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; > + label = "dsps"; > + qcom,remote-pid = <3>; > + mboxes = <&apss_shared 24>; > + }; > + }; > + > +
Do not add double blank lines. Same in other patchsets.
Best regards, Krzysztof
| |