lkml.org 
[lkml]   [2023]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm64: dts: ti: k3-am625-sk: Enable Type-C port for USB0
Date
USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 40 ++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index be027fad5f61..c80b12943881 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -315,6 +315,33 @@ &main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
+
+ tps6598x@3f {
+ compatible = "ti,tps6598x";
+ reg = <0x3f>;
+ interrupt-parent = <&exp1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "irq";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ self-powered;
+ data-role = "dual";
+ power-role = "sink";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&usb0_hs_ep>;
+ };
+ };
+ };
+ };
+ };
};

&main_i2c1 {
@@ -336,7 +363,7 @@ exp1: gpio@22 {
"UART1_FET_BUF_EN", "WL_LT_EN",
"GPIO_HDMI_RSTn", "CSI_GPIO1",
"CSI_GPIO2", "PRU_3V3_EN",
- "HDMI_INTn", "TEST_GPIO2",
+ "HDMI_INTn", "PD_I2C_IRQ",
"MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
"MCASP1_FET_SEL", "UART1_FET_SEL",
"TSINT#", "IO_EXP_TEST_LED";
@@ -486,7 +513,16 @@ &usbss1 {
};

&usb0 {
- dr_mode = "peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb-role-switch;
+
+ port@0 {
+ reg = <0>;
+ usb0_hs_ep: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
};

&usb1 {
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 01:16    [W:0.075 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site