lkml.org 
[lkml]   [2023]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtc: k3: handle errors while enabling wake irq
On 23/03/2023 13:49:42+0530, Dhruva Gole wrote:
> Due to the potential failure of enable_irq_wake(), it would be better to
> check it and return error if it fails.
>
> Fixes: b09d633575e5 ("rtc: Introduce ti-k3-rtc")
> Cc: Nishanth Menon <nm@ti.com>
> Signed-off-by: Dhruva Gole <d-gole@ti.com>
> ---
> drivers/rtc/rtc-ti-k3.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/rtc/rtc-ti-k3.c b/drivers/rtc/rtc-ti-k3.c
> index ba23163cc042..ef9d7e1cf92e 100644
> --- a/drivers/rtc/rtc-ti-k3.c
> +++ b/drivers/rtc/rtc-ti-k3.c
> @@ -630,9 +630,18 @@ MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table);
> static int __maybe_unused ti_k3_rtc_suspend(struct device *dev)
> {
> struct ti_k3_rtc *priv = dev_get_drvdata(dev);
> + int error;

This variable is not necessary.

>
> if (device_may_wakeup(dev))
> - enable_irq_wake(priv->irq);
> + error = enable_irq_wake(priv->irq);
> +
> + if (error) {
> + dev_err(dev,
> + "failed to enable irq wake on IRQ %d: %d\n",
> + priv->irq, error);

Please remove this message, this is too verbose and there is no action
for the user apart from trying to go to suspend again.

> + return error;
> + }
> +
> return 0;
> }
>
> --
> 2.25.1
>

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2023-03-27 01:13    [W:0.022 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site