lkml.org 
[lkml]   [2023]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] block: don't set GD_NEED_PART_SCAN if scan partition failed
Date
From: Yu Kuai <yukuai3@huawei.com>

Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.

Test procedure:

mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb

Test result: underlying disk partition and raid partition can be
observed at the same time

Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.

Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
block/genhd.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/block/genhd.c b/block/genhd.c
index 08bb1a9ec22c..a72e27d6779d 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -368,7 +368,6 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode)
if (disk->open_partitions)
return -EBUSY;

- set_bit(GD_NEED_PART_SCAN, &disk->state);
/*
* If the device is opened exclusively by current thread already, it's
* safe to scan partitons, otherwise, use bd_prepare_to_claim() to
@@ -381,12 +380,19 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode)
return ret;
}

+ set_bit(GD_NEED_PART_SCAN, &disk->state);
bdev = blkdev_get_by_dev(disk_devt(disk), mode & ~FMODE_EXCL, NULL);
if (IS_ERR(bdev))
ret = PTR_ERR(bdev);
else
blkdev_put(bdev, mode & ~FMODE_EXCL);

+ /*
+ * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set,
+ * and this will cause that re-assemble partitioned raid device will
+ * creat partition for underlying disk.
+ */
+ clear_bit(GD_NEED_PART_SCAN, &disk->state);
if (!(mode & FMODE_EXCL))
bd_abort_claiming(disk->part0, disk_scan_partitions);
return ret;
--
2.31.1
\
 
 \ /
  Last update: 2023-03-27 01:11    [W:0.202 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site