lkml.org 
[lkml]   [2023]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 04/12] soc: qcom: pmic_glink: register ucsi aux device
From
On 21/03/2023 15:21, Neil Armstrong wrote:
> Only register UCSI on know working devices, like on the SM8450
> or SM8550 which requires UCSI to get USB mode switch events.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Two nits below:

> ---
> drivers/soc/qcom/pmic_glink.c | 65 +++++++++++++++++++++++++++++++++++--------
> 1 file changed, 54 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
> index bb3fb57abcc6..8bf95df0a56a 100644
> --- a/drivers/soc/qcom/pmic_glink.c
> +++ b/drivers/soc/qcom/pmic_glink.c
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Ltd
> */
> #include <linux/auxiliary_bus.h>
> +#include <linux/of_device.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> @@ -11,12 +12,23 @@
> #include <linux/soc/qcom/pdr.h>
> #include <linux/soc/qcom/pmic_glink.h>
>
> +enum {
> + PMIC_GLINK_CLIENT_BATT = 0,
> + PMIC_GLINK_CLIENT_ALTMODE,
> + PMIC_GLINK_CLIENT_UCSI,
> +};
> +
> +#define PMIC_GLINK_CLIENT_DEFAULT (BIT(PMIC_GLINK_CLIENT_BATT) | \
> + BIT(PMIC_GLINK_CLIENT_ALTMODE))
> +
> struct pmic_glink {
> struct device *dev;
> struct pdr_handle *pdr;
>
> struct rpmsg_endpoint *ept;
>
> + unsigned long client_mask;
> +
> struct auxiliary_device altmode_aux;
> struct auxiliary_device ps_aux;
> struct auxiliary_device ucsi_aux;
> @@ -233,6 +245,7 @@ static struct rpmsg_driver pmic_glink_rpmsg_driver = {
>
> static int pmic_glink_probe(struct platform_device *pdev)
> {
> + const unsigned long *match_data;
> struct pdr_service *service;
> struct pmic_glink *pg;
> int ret;
> @@ -249,12 +262,27 @@ static int pmic_glink_probe(struct platform_device *pdev)
> mutex_init(&pg->client_lock);
> mutex_init(&pg->state_lock);
>
> - ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> - if (ret)
> - return ret;
> - ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> - if (ret)
> - goto out_release_altmode_aux;
> + match_data = (unsigned long *)of_device_get_match_data(&pdev->dev);

Nit: type cast should not be necessary here.

> + if (match_data)
> + pg->client_mask = *match_data;
> + else
> + pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
> +
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
> + if (ret)
> + return ret;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> + if (ret)
> + goto out_release_ucsi_aux;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> + if (ret)
> + goto out_release_altmode_aux;
> + }
>
> pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
> if (IS_ERR(pg->pdr)) {
> @@ -278,9 +306,14 @@ static int pmic_glink_probe(struct platform_device *pdev)
> out_release_pdr_handle:
> pdr_handle_release(pg->pdr);
> out_release_aux_devices:
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> out_release_altmode_aux:
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> +out_release_ucsi_aux:
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> return ret;
> }
> @@ -291,8 +324,12 @@ static int pmic_glink_remove(struct platform_device *pdev)
>
> pdr_handle_release(pg->pdr);
>
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> mutex_lock(&__pmic_glink_lock);
> __pmic_glink = NULL;
> @@ -301,8 +338,14 @@ static int pmic_glink_remove(struct platform_device *pdev)
> return 0;
> }
>
> +/* Do not handle altmode for now on those platforms */
> +static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
> + BIT(PMIC_GLINK_CLIENT_UCSI);
> +
> static const struct of_device_id pmic_glink_of_match[] = {
> - { .compatible = "qcom,pmic-glink", },

Nit: one can leave comma in place to remove noise.

> + { .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + { .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + { .compatible = "qcom,pmic-glink" },
> {}
> };
> MODULE_DEVICE_TABLE(of, pmic_glink_of_match);
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-03-27 01:11    [W:0.153 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site